High Performance Valve System
نویسندگان
چکیده
This paper covers the design and performance of a radically new valve system now being used in semi-hermetic compressors. The discharge valve, trademarked the "Discus Valve," is made from a high temperature polymeric material. This valve, together with a unique laminated steel valve plate and a ring-type suction valve, provides large flow areas, low clearance volumes, and high efficiency. The development of this valve system required the determination of the long-term physical integrity of the valve material and the design of suitable spring and retention systems. The valve plate development required optimization of performance, durability and machinability. In addition to details of these developments, the paper describes the long-term reliability tests run on components and assemblies to guarantee that re,l iability as well as performance goals were met.
منابع مشابه
Research of Intake Valve Deactivation on Engine Performance
In this paper, the effect of the Intake Valve Deactivation (IVDA) on engine performance is investigated in detail. Based on an optimization platform with Genetic Algorithm (GA) and engine thermodynamic model, the characteristics of the engine volumetric efficiency and pumping loss were studied under the cam-drive, Single Intake Valve (SIV) and Dual Intake Valves (DIV) operating modes, and the e...
متن کاملBenefits of the Electromagnetic Actuated Valve Train in Gasoline Engine Application
Engines equipped with camless valve trains will have greater space for performance optimization. In this paper, based on the electromagnetic actuated valve train system, one-dimensional and three-dimensional simulation models on engine thermodynamic cycle and in-cylinder charge motion are established, respectively. With the application of early-intake-valve closing (EIVC) strategy，unthrottled l...
متن کاملPerformance study of a diaphragm type crankcase pressure control valve
Pressure control valve (PCV) is implemented in internal combustion engine to regulate crankcase pressure. In this study, the performance of a diaphragm PCV valve is investigated numerically and experimentally. Firstly, numerical simulation is carried out using commercial code to predict the flow and pressure distribution inside the valve. Furthermore, downstream and upstream pressure of the val...
متن کاملInfluence of unsuitable operational conditions on the transient performance of a small hydrogen liquefier
Joule-Thomson cooling systems are used in refrigeration processes such as cryogenic gas liquefaction. Although extensive studies have been carried out by researchers, most of them include cryogenic heat exchangers and their associated fields. In the current study, an attempt was made to indicate the effect of using inappropriate operational conditions in a cryogenic Joule-Thomson cooling system...
متن کاملSimulation and investigation of the effect of oil flow rate, electric signal of flow control valve and controller on the performance of a wet clutch
The using of wet clutches and hydraulic control devices causes a smoothly torque transfer. In this study, a wet clutch was simulated in Simulink MATLAB software. Firstly the mechanical section of the clutch was modeled and then the hydraulic section was simulated with the addition of electric flow control valve and inlet and outlet of oil flow. Finally, the effects of oil flow rate, electric s...
متن کاملطراحی و ارزیابی شیر کنترل اتوماتیک ایجاد هیدروگرافهای متفاوت جریان ورودی به جویچه
Most furrow irrigation systems have low performance due to deep percolation at the upstream end and tailwater runoff at the downstream end of the field. To eliminate this problem improving furrow irrigation performance is necessary. Since the inflow discharge has high effect on infiltration along the furrow which consequently affects the application efficiency and water distribution uniformity,...
متن کامل