Thermoplastic Labyrinth Seals for Centrifugal Compressors
نویسنده
چکیده
For over 15 years now, the efficiency and reliability of centrifugal compressors have been enhanced by the application of thermoplastic materials to the eye, shaft, and balance piston labyrinth seals. Traditionally these seals have been manufactured from metallic materials and have required relatively large clearances for reliability reasons. By upgrading to carefully selected engineered thermoplastics, the clearances can be reduced without sacrificing reliability. This results in increased compressor efficiency and the added benefit of easier installation. This tutorial will review the design and application of thermoplastic seals as used in centrifugal compressors. The tutorial will not cover in any detail abradable seals (such as babbitt or lead lined), reduced crosscoupling seals, or “other” seals (such as honeycomb, brush, carbon ring, dry gas, etc.).
منابع مشابه
Upgrading Centrifugal Compressors with Polymer Seals in an Ethylene Plant—a Cas
Thermoplastic use as labyrinth seals in rotating equipment is continuing to gain acceptance in the process industries. Presented in this paper is a discussion on thermoplastic use as a labyrinth seal material in centrifugal process compressors. Labyrinths made from engineering thermoplastics are used to improve efficiency, reliability, and installation time. An introduction to the polymer mater...
متن کاملDevelopment of Abradable and Rub Tolerant Seal Materials for Application in Centrifugal Compressors and Steam Turbines
The use of abradable and rub tolerant polymer seals to reduce leakage between rotating and stationary members in centrifugal compressors and steam turbines has increased over the years. Abradable materials such as mica-filled tetrafluoroethylene (TFE), nickel graphite, and aluminum alloy containing silicon/polyester are the most commonly used and have gained acceptance in the marketplace. This ...
متن کاملThe Effects of Pulsations on the Surge Margin of Centrifugal Compressors in Stations with Both Reciprocating and Centrifugal Compressors
Rotating Machinery and Measurement Technology Section at Southwest Research Institute, in San Antonio, Texas. His research interests are in the areas of turbomachinery aerothermal fluid dynamics, process system analysis, energy management, advanced thermodynamic cycles, instrumentation and measurement, and combustion technology. He is widely experienced in performance prediction, off-design fun...
متن کاملDynamic Characterization of Fully Partitioned Damper Seals NEW PROPOSAL
Balance piston seals are subjected to large pressure differential and can generate large forces directly impacting the stability of centrifugal compressors. The most common designs are textured seals such as honeycomb, hole-pattern seals, and pocketed seals including pocket damper seals (PDS) and fully partition damper seals (FPDS), shown in Fig. 1. The dynamic performance of textured seals hav...
متن کاملAn Artificial Neural Network Model for Prediction of the Operational Parameters of Centrifugal Compressors: An Alternative Comparison Method for Regression
Nowadays, centrifugal compressors are commonly used in the oil and gas industry, particularly in the energy transmission facilities just like a gas pipeline stations. Therefore, these machines with different operational circumstances and thermodynamic characteristics are to be exploited according to the operational necessities. Generally, the most important operational parameters of a gas pipel...
متن کامل