Precise Comparison of Two-dimensional Dopant Profi les Measured by Low-voltage Scanning Electron Microscopy and Electron Holography Techniques

نویسندگان

  • Moon Seop Hyun
  • Jung Ho Yoo
  • Noh-Yeal Kwak
  • Won Kim
  • Choong Kyun Rhee
  • Jun-Mo Yang
چکیده

As the size of metal-oxide-semiconductor field-effect transistors (MOSFETs) shrinks to nanoscale, the precise and reliable dopant profiling in shallow junctions has become important for device modeling and operation (Bertrand et al.,2004). Secondary ion mass spectrometry (SIMS) and spreading resistance profiling are widely used as practical characterization techniques to reveal one-dimensional (1D) dopant distribution in p-n junctions. However, both techniques are not sufficient to delineate the accurate and reliable lateral dopant distribution of nanoscaled MOSFETs devices. Two-dimensional (2D) dopant profiling methods such as chemical etching delineation (CED) (Eo et al., 2004; Shaislamov et al., 2008), scanning capacitance microscopy (SCM) (Zavyalov et al., 1999; Morita, 2007), electron holography (EH) (Völkl et al., 1998; Tonomura, 1999), and low-voltage scanning electron microscopy (LV-SEM) (Venables & Maher, 1996; Elliott et al., 2002; El-Gomati et al., 2005) have been received a lot of attention due to their high spatial resolution. The CED method is based on the chemical etching of the specimen containing p-n junctions, where etching rate depends on the difference of dopant type and concentrations. This method is favored due to its quick and simple experimental procedure. However, due to the difficulty in controlling the etching process, this technique does not provide reproducibility and quantitative information. On the other hand, the SCM technique which is based on the atomic force microscope has been shown to be useful for the quantitative 2D dopant profiling with good sensitivity and wide dynamic range of 10~10 atom/cm. This technique can extract the 2D carrier profi les in semiconductor devices by mapping the local capacitance variation (dC/dV) between Precise Comparison of Two-dimensional Dopant Profi les Measured by Low-voltage Scanning Electron Microscopy and Electron Holography Techniques

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Finite element simulations of electrostatic dopant potentials in thin semiconductor specimens for electron holography.

Two-dimensional finite element simulations of electrostatic dopant potentials in parallel-sided semiconductor specimens that contain p-n junctions are used to assess the effect of the electrical state of the surface of a thin specimen on projected potentials measured using off-axis electron holography in the transmission electron microscope. For a specimen that is constrained to have an equipot...

متن کامل

Variable-angle high-angle annular dark-field imaging: application to three-dimensional dopant atom profiling

Variable-angle high-angle annular dark-field (HAADF) imaging in scanning transmission electron microscopy is developed for precise and accurate determination of three-dimensional (3D) dopant atom configurations. Gd-doped SrTiO3 films containing Sr columns containing zero, one, or two Gd dopant atoms are imaged in HAADF mode using two different collection angles. Variable-angle HAADF significant...

متن کامل

A New Design for Measuring Potentials in Operando Nanoelectronic Devices by Electron Holography

Electron holography (EH) based on transmission electron microscope (TEM) is widely recognized as a powerful interferometric technique to image and quantify electric and magnetic fields for a variety of physical and chemical applications [1]. Off-axis EH has been successfully applied for accurate quantitative two-dimensional (2D) mapping of intrinsic electrostatic potentials arising from materia...

متن کامل

Three-Dimensional Nanoscale Mapping of State-of-the-Art Field-Effect Transistors (FinFETs).

The semiconductor industry has seen tremendous progress over the last few decades with continuous reduction in transistor size to improve device performance. Miniaturization of devices has led to changes in the dopants and dielectric layers incorporated. As the gradual shift from two-dimensional metal-oxide semiconductor field-effect transistor to three-dimensional (3D) field-effect transistors...

متن کامل

Field Mapping in Semiconductors by Off-axis Electron Holography: From Devices to Graphene and Single Dopant Atoms

Off-axis electron holography is an electron microscopy-based technique that allows the electrostatic and magnetic fields in and around a specimen to be measured with nm-scale resolution. The continuous reduction in the size of semiconductor devices means that information about the distribution of strain fields and active dopants at a nanometre scale is required in order to understand how these ...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2012