Effect of carrier gases on microstructural and electrochemical behavior of cold-sprayed 1100 aluminum coating
نویسندگان
چکیده
1100 Aluminum has been cold sprayed onto similar substrate using 100 vol.% He and mixture of He–20 vol.% N2 as carrier gases. Analysis and characterization of sprayed depositions under different processing conditions was performed through optical micrography, stereological analysis, scanning electron microscopy, and microhardness depth profiles. Potentiodynamic polarization curves and Tafel extrapolation experiments were carried at 0.9 pH value using sulfuric acid (H2SO4) as an electrolyte. Helium processing condition displayed more compact structure and higher hardness for the coating when compared to He–20 vol.% N2 processing. Electrochemical studies depicted better corrosion resistance of the He–20 vol.% N2-processed coatings when compared to coatings processed with helium alone. D 2004 Elsevier B.V. All rights reserved.
منابع مشابه
Transmission electron microscopy of cold sprayed 1100 aluminum coating
Cold-spraying of 1100 Al powder particles onto 1100 Al substrate was accomplished using carrier gases 100 vol.% He and a mixture of He–20 vol.% N2. TEM characterization correlates very well the occurrence of dislocations, presence of oxide, and surface instability phenomenon with observed mechanical and corrosion properties of the cold-sprayed coating. 2005 Acta Materialia Inc. Published by Els...
متن کاملEffect of heat treatment on microstructural properties of three-layer sheet aluminum magnesium - aluminum - stainless steel
Metal coating, metal materials are of two or more layers. The coating metals are widely used in industry. These sheets or saving performance and cost effective solution or both the user. Performance coating metals according to usage in structural applications, settings thermal expansion of the thermo-mechanical control (thermostat), electrical, magnetic, corrosion resistant, flowering and decor...
متن کاملCorrosion Behavior of Detonation Gun Sprayed Fe-Al Type Intermetallic Coating
The detonation gun sprayed Fe-Al type coatings as an alternative for austenitic valve steel, were investigated using two different methods of testing corrosion resistance. High temperature, 10-hour isothermal oxidation experiments at 550, 750, 950 and 1100 °C show differences in the oxidation behavior of Fe-Al type coatings under air atmosphere. The oxide layer ensures satisfying oxidation resi...
متن کاملEffect of Repeated Repair Metal Inert Gas Welding on Microstructural Properties, Corrosion Resistance, and Wear Behavior of 5083-H116 Aluminum Alloy
The effect of repeated repair welding, shielded with argon, on microstructural properties, corrosion resistance, and dry sliding wear behavior of aluminum alloy 5083/H116 were investigated. Samples were welded by metal inert gas welding method. 100% argon was used to protect fusion zone. Aluminum alloy 5356 was used as the filler metal. The samples for microstructure, corrosion, and wear tests ...
متن کاملThe Study of High Temperature Oxidation behavior of Different Microstructures of HVOF Thermally Sprayed Coatings
Improvement of thermally sprayed coating properties by microstructure modification has been considered as a significant solution. Therefore, in this research the effect of dissolved oxygen content and post heat treatment on the formation and distribution of secondary phase particles, particularly in nano-scale in the coatings during spraying and after that were studied. Ni-5 wt% Al powders were...
متن کامل