Simulation Study of Radial Heat and Mass Transfer Inside a Fixed Bed Catalytic Reactor
نویسندگان
چکیده
A rigorous two-dimensional model is developed for simulating the operation of a less-investigated type steam reformer having a considerably lower operating Reynolds number, higher tube diameter, and non-availability of extra steam in the feed compared with conventional steam reformers. Simulation results show that reasonable predictions can only be achieved when certain correlations for wall to fluid heat transfer equations are applied. Due to severe operating conditions, in all cases, strong radial temperature gradients inside the reformer tubes have been found. Furthermore, the results show how a certain catalyst loading profile will affect the operation of the reformer. Keywords—Steam Reforming, Direct Reduction, Heat Transfer, Two-Dimensional Model, Simulation
منابع مشابه
Modeling and Simulation a Catalytic Fixed Bed Reactor to Produce Ethyl Benzene from Ethanol
Ethyl benzene used increasingly each year is the raw material of producing styrene monomer. This substanceis produced from benzene alkylation with ethylene or ethanol, depending on the availability and cost of rawmaterials. In this study benzene alkylation in the presence of ethanol in a catalytic fixed bed reactor inthree states of isotherm, adiabatic and non-isotherm-non-adiabatic is mathemat...
متن کاملCFD Simulation of Porosity and Particle Diameter Influence on Wall-to-Bed Heat Transfer in Trickle Bed Reactors
Wall-to-bed (or wall-to-fluid) heat transfer issues in trickle bed reactors (TBR) has an important impact on operation and efficiency in this category of reactors. In this study, the hydrodynamic and thermal behavior of trickle bed reactors was simulated by means of computational fluid dynamics (CFD) technique. The multiphase behavior of trickle bed reactor was studied by the implementation of ...
متن کاملImproved numerical simulation of the low temperature Fischer-Tropsch synthesis in a trickle bed reactor
Abstract Gas to liquid (GTL) process involves heterogeneous catalytic chemical reactions that convert synthesis gas to hydrocarbons and water vapor. A three phase reactor, called Low temperature Fischer-Tropsch (LTFT) is commonly applied for GTL process. In this reactor the gaseous phase includes the synthesis gas, light hydrocarbons and water vapor, the liquid phase is a mixture of the h...
متن کاملHeat and Mass Transfer in Fixed-bed Tubular Reactor
Heat and mass transfer problem in a fixed-bed tubular reactor is one of the major concerns in the chemical engineering. The two dimensional axial plug flow model was used for a water gas shift reactor to compare heat conduction or mass diffusion with convective effect. In the case of fast fluid flow in highly permeable catalyst-bed, convective heat transfer was dominant compared to heat conduct...
متن کاملمدل سازی، طراحی و ساخت راکتور بستر ثابت واکنش تجزیه ی کاتالیستی هیدرازین
In this research, first, a one-dimensional stable model for a catalytic stabilization reactor is presented. All mass transfer, heat transfer and momentum equations are considered in this model with applying appropriate assumptions. The results of modeling predict temperature and concentration changes and also pressure drop along the reactor bed length. By applying the modeling, hydrazine cataly...
متن کامل