Non-destructive Inspection of Wire Ropes Is Wise Mean to Provide Safety and Cost Savings
نویسنده
چکیده
Large number of ferrous steel wire ropes is in use in different industries, carrying people and freight, supporting bridges and towers, lifting pipes and vessels offshore and onshore, underground and aboveground. The bigger and the longer is the rope, the more expensive it is. Later or sooner ropes deteriorate for different reasons, their further use may be dangerous, and important question arise: whether the rope should be discarded or still may remain in operation. Premature discard and replacement with the new rope involves in unreasonable costs, while operating the rope which already reached discard criteria is dangerous. The sensible answer is discarding in time, i.e. for reason. Reasonable discard is possible based on proper inspection, otherwise technical condition of rope remains unknown. Visual inspection is obvious, but only visual examination is not sufficient due to specific rope design. Nondestructive magnetic inspection of ropes enables to gather comprehensive data for making reasoned decision. Magnetic flux leakage (MFL) equipment with strong magnetization can inspect ropes reliably, and smart software facilitates data interpretation. Reach experience with NDT of ropes spilled over into development of relevant national and international norms and standards. Why must ropes be inspected and examined? Wire ropes are consumable items with limited life. During service the physical properties of the wire rope will change. At the commencement of service, the individual wires and strands settle into position and the rope breaking strength increases. After reaching a maximum it decreases rapidly. (Fig 1) One of the objective of inspecting or examining a wire rope is to supervise the normal process of deterioration so that rope can be removed from service before becoming a hazard to safety. Another benefit of the inspection and examination procedures is to detect unexpected damage or corrosion. M or e In fo a t O pe n A cc es s D at ab as e w w w .n dt .n et /? id = 15 07 7
منابع مشابه
Robustness of Different Features for One-class Classification and Anomaly Detection in Wire Ropes
Automatic visual inspection of wire ropes is an important but challenging task. Anomalies in wire ropes usually are unobtrusive and their detection is a difficult job. Certainly, a reliable anomaly detection is essential to assure the safety of the ropes. A one-class classification approach for the automatic detection of anomalies in wire ropes is presented. Different well-established features ...
متن کاملPropagation of Ultrasonic Guided Waves in Composite Multi-Wire Ropes
Multi-wire ropes are widely used as load-carrying constructional elements in bridges, cranes, elevators, etc. Structural integrity of such ropes can be inspected by using non-destructive ultrasonic techniques. The objective of this work was to investigate propagation of ultrasonic guided waves (UGW) along composite multi-wire ropes in the cases of various types of acoustic contacts between neig...
متن کاملOn the Suitability of Different Features for Anomaly Detection in Wire Ropes
Automatic visual inspection of wire ropes is an important but challenging task, as anomalies in the rope are usually unobtrusive. Certainly, a reliable anomaly detection is essential to assure the safety of the ropes. A one-class classification approach for the automatic detection of anomalies in wire ropes is presented. Furthermore, the performance of different well-established features from t...
متن کاملHMM-Based Defect Localization in Wire Ropes - A New Approach to Unusual Subsequence Recognition
Automatic visual inspection has become an important application of pattern recognition, as it supports the human in this demanding and often dangerous work. Nevertheless, often missing abnormal or defective samples prohibit a supervised learning of defect models. For this reason, techniques known as one-class classification and noveltyor unusual event detection have arisen in the past years. Th...
متن کاملTerahertz Application for Non-Destructive Inspection of Coated Al Electrical Conductive Wires
At present, one of the main inspection methods of electric wires is visual inspection. The development of a novel non-destructive inspection technology is required because of various problems, such as water invasion by the removal of insulators. Since terahertz (THz) waves have high transparency to nonpolar substances such as coatings of conductive wire, electric conductive wires are extremely ...
متن کامل