Nanoparticle assembly via the dewetting of patterned thin metal lines: understanding the instability mechanisms.

نویسندگان

  • Lou Kondic
  • Javier A Diez
  • Philip D Rack
  • Yingfeng Guan
  • Jason D Fowlkes
چکیده

Nanosecond pulsed laser heating was used to control the assembly of spatially correlated nanoparticles from lithographically patterned pseudo-one-dimensional nickel lines. The evolution of the nickel line instabilities and nanoparticle formation with a correlated size and spacing was observed after a series of laser pulses. To understand the instabilities that direct the nanoparticle assembly, we have carried out nonlinear time-dependent simulations and linear stability analysis based on a simple hydrodynamic model. We find that the simulated time scales and length scales agree well with the experimental results. Interestingly, in both experiments and simulations, the instabilities associated with the line edge, and with the surface perturbation-driven mechanism, are found to result in similar particle sizes and spacings.

برای دانلود رایگان متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Self– versus Directed– assembly of Nanoparticles via Pulsed Laser Induced Dewetting of Patterned Metal Films

A nanoscale, synthetic perturbation was all that was required to nudge a natural, self–assembly process toward significantly higher order. Nanolithography was used to impose the perturbation which ultimately led to an organized nanoparticle array. Specifically, liquid–phase pulsed laser induced dewetting (PLiD) was used to transform metallic thin film strips into nanoparticle arrays. Initially,...

متن کامل

On the breakup of patterned nanoscale copper rings into droplets via pulsed-laser-induced dewetting: competing liquid-phase instability and transport mechanisms.

Nanolithographically patterned copper rings were synthesized, and the self-assembly of the rings into ordered nanoparticle/nanodrop arrays was accomplished via nanosecond pulsed laser heating above the melt threshold. The resultant length scale was correlated to the transport and instability growths that occur during the liquid lifetime of the melted copper rings. For 13-nm-thick rings, a chang...

متن کامل

Stability and dewetting of metal nanoparticle filled thin polymer films: control of instability length scale and dynamics.

We investigate the influence of gold nanoparticle addition on the stability, dewetting, and pattern formation in ultrathin polymer-nanoparticle (NP) composite films by examining the length and time scales of instability, morphology, and dynamics of dewetting. For these 10-50 nm thick (h) polystyrene (PS) thin films containing uncapped gold nanoparticles (diameter approximately 3-4 nm), transiti...

متن کامل

Assembly of metallic nanoparticle arrays on glass via nanoimprinting and thin-film dewetting

We propose a nanofabrication process to generate large-area arrays of noble metal nanoparticles on glass substrates via nanoimprinting and dewetting of metallic thin films. Glass templates were made via pattern transfer from a topographic Si mold to an inorganically cross-linked sol-gel (IGSG) resist on glass using a two-layer polydimethylsiloxane (PDMS) stamp followed by annealing, which turne...

متن کامل

Growth modes of nanoparticle superlattice thin films.

We report on the fabrication and characterization of iron oxide nanoparticle thin film superlattices. The formation into different film morphologies is controlled by tuning the particle plus solvent-to-substrate interaction. It turns out that the wetting vs dewetting properties of the solvent before the self-assembly process during solvent evaporation plays a major role in determining the resul...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

عنوان ژورنال:
  • Physical review. E, Statistical, nonlinear, and soft matter physics

دوره 79 2 Pt 2  شماره 

صفحات  -

تاریخ انتشار 2009