Nanofluidics. Observing liquid flow in nanotubes by 4D electron microscopy.
نویسندگان
چکیده
Nanofluidics involves the study of fluid transport in nanometer-scale structures. We report the direct observation of fluid dynamics in a single zinc oxide nanotube with the high spatial and temporal resolution of four-dimensional (4D) electron microscopy. The nanotube is filled with metallic lead, which we melt in situ with a temperature jump induced by a heating laser pulse. We then use a short electron pulse to create an image of the ensuing dynamics of the hot liquid. Single-shot images elucidate the mechanism of irreversible processes, whereas stroboscopic diffraction patterns provide the heating and cooling rates of single nanotubes. The temporal changes of the images enable studies of the viscous friction involved in the flow of liquid within the nanotube, as well as studies of mechanical processes such as those that result in the formation of extrusions.
منابع مشابه
Flow conveying and diagnosis with carbon nanotube arrays
Dense arrays of aligned carbon nanotubes are designed into strips, nanowicks, as a miniature wicking element for liquid delivery and potential microfluidic chemical analysis devices. Liquid wicks away along the nanowicks spontaneously. This delivery function of nanowicks enables novel fluid transport devices to run without any power input, moving parts or external pump. Flow around the opaque n...
متن کاملThe Synthesis of Carbon Nano Tubes by Arc Discharge Method in Liquid media
In this investigation a simplified arc discharge apparatus was used to synthesize mullti-wall carbon nanotubes. Because of not requiring vacuum equipment, heat exchange system, active or inert gases, this method is found to be cheaper and simpler than traditional arc discharge in gas environment. Using this method, CNTs are produced by performing an arc discharge between two graphite electrodes...
متن کاملOptimization of Experimental Conditions for Fabrication of Carbon Nanotubes Based onTaguchi obust Design Method
Carbon nanotube, a new structure of carbon element, is composed of graphene sheets rolled into closed concentric cylinders with diameter of the order of nanometers and length of micrometers. Liquid arc discharge was used for fabrication of carbon nanotubes, and subsequently a modified acid treatment method applied for purification stage. A statistical design of experimental (DOE) (Taguchi metho...
متن کاملClocking the anisotropic lattice dynamics of multi-walled carbon nanotubes by four-dimensional ultrafast transmission electron microscopy
Recent advances in the four-dimensional ultrafast transmission electron microscope (4D-UTEM) with combined spatial and temporal resolutions have made it possible to directly visualize structural dynamics of materials at the atomic level. Herein, we report on our development on a 4D-UTEM which can be operated properly on either the photo-emission or the thermionic mode. We demonstrate its abilit...
متن کاملA PARAMETRIC STUDY ON THE GROWTH OF SINGLE-WALLED CARBON NANOTUBES OVER CO-MO/MGO NANOCATALYST IN A FLUIDIZED BED REACTOR BY CCVD METHOD
Single-walled carbon nanotubes (SWNTs) with high yield and quality were synthesized using chemical vapor deposition (CVD) over Co-Mo/ MgO nanocatalyst in a fluidized bed reactor. Different parameters such as temperature, the ratio of hydrocarbon source to hydrogen, the flow rate of gas, growth time, the size of catalyst particles, heating rate, and the kind of hydrocarbon source were examined t...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Science
دوره 344 6191 شماره
صفحات -
تاریخ انتشار 2014