Linking the kilogram to Electrical Quantities by the Energy Dissipated in a Pendulum
نویسنده
چکیده
The development of system for linking the kilogram to electrical quantities is described in this paper. The method is based on a multifilar pendulum interacting with a coil, where a variable electromotive force that produces a current in the coil and in a suitable external resistor is generated. The electrical energy dissipated is measured and the mass is evaluated from this energy and from the kinematics of the pendulum.
منابع مشابه
MINIMUM TIME SWING UP AND STABILIZATION OF ROTARY INVERTED PENDULUM USING PULSE STEP CONTROL
This paper proposes an approach for the minimum time swing upof a rotary inverted pendulum. Our rotary inverted pendulum is supported bya pivot arm. The pivot arm rotates in a horizontal plane by means of a servomotor. The opposite end of the arm is instrumented with a joint whose axisis along the radial direction of the motor. A pendulum is suspended at thejoint. The task is to design a contro...
متن کاملChemical cross linking versus high energy electron beam cross linking of HDPE: electrical properties study
Cross linking of high density polyethylene (HDPE) was first performed via high energy10 Mev electron beam (EB) irradiation. HDPE was also cross linked withDicumyle peroxide (DCP).The gel content of samples was determined by solvent extraction.Degree of cross linking was evaluated by hot set apparatus; as well .In order to clarify the effectof nature of cross linking, correlation of electrical p...
متن کاملUsing the Adaptive Frequency Nonlinear Oscillator for Earning an Energy Efficient Motion Pattern in a Leg- Like Stretchable Pendulum by Exploiting the Resonant Mode
In this paper we investigate a biological framework to generate and adapt a motion pattern so that can be energy efficient. In fact, the motion pattern in legged animals and human emerges among interaction between a central pattern generator neural network called CPG and the musculoskeletal system. Here, we model this neuro - musculoskeletal system by means of a leg - like mechanical system cal...
متن کاملPower optimization of a piezoelectric-based energy harvesting cantilever beam using surrogate model
Energy harvesting is a conventional method to collect the dissipated energy of a system. In this paper, we investigate the optimal location of a piezoelectric element to harvest maximum power concerning different excitation frequencies of a vibrating cantilever beam. The cantilever beam oscillates by a concentrated sinusoidal tip force, and a piezoelectric patch is integrated on the beam to gen...
متن کاملExperimental Evaluation of IRWEC1, a Novel Offshore Wave Energy Converter
This paper describes the innovative offshore point-absorber wave energy converter (WEC), IRWEC1, under development by the Hydrodynamics, Acoustics and Marine propulsion Group at Babol Noshirvani University of Technology. Totally enclosed in an outer shell, with no external moving parts, IRWEC1 is completely sealed which make it a robust and trustable system. Important motion for this WEC is the...
متن کامل