Bulk synthesis of silicon nanowires using a low-temperature vapor–liquid–solid method
نویسندگان
چکیده
Silicon nanowires will find applications in nanoscale electronics and optoelectronics both as active and passive components. Here, we demonstrate a low-temperature vapor–liquid–solid synthesis method that uses liquid-metal solvents with low solubility for silicon and other elemental semiconductor materials. This method eliminates the usual requirement of quantum-sized droplets in order to obtain quantum-scale one-dimensional structures. Specifically, we synthesized silicon nanowires with uniform diameters distributed around 6 nm using gallium as the molten solvent, at temperatures less than 400 °C in hydrogen plasma. The potential exists for bulk synthesis of silicon nanowires at temperatures significantly lower than 400 °C. Gallium forms a eutectic with silicon near room temperature and offers a wide temperature range for bulk synthesis of nanowires. These properties are important for creating monodispersed one-dimensional structures capable of yielding sharp heteroor homointerfaces. © 2001 American Institute of Physics. @DOI: 10.1063/1.1401089#
منابع مشابه
Gold catalytic Growth of Germanium Nanowires by chemical vapour deposition method
Germanium nanowires (GeNWs) were synthesized using chemical vapor deposition (CVD) based on vapor–liquid–solid (VLS) mechanism with Au nanoparticles as catalyst and germanium tetrachloride (GeCl4) as a precursor of germanium. Au catalysts were deposited on silicon wafer as a thin film, firstly by sputtering technique and secondly by submerging the silicon substrates in Au colloidal s...
متن کاملTowards a full integration of vertically aligned silicon nanowires in MEMS using silane as a precursor.
Silicon nanowires present outstanding properties for electronics, energy, and environmental monitoring applications. However, their integration into microelectromechanical systems (MEMS) is a major issue so far due to low compatibility with mainstream technology, which complicates patterning and controlled morphology. This work addresses the growth of 〈111〉 aligned silicon nanowire arrays fully...
متن کاملA laser ablation method for the synthesis of crystalline semiconductor nanowires
A method combining laser ablation cluster formation and vapor-liquid-solid (VLS) growth was developed for the synthesis of semiconductor nanowires. In this process, laser ablation was used to prepare nanometer-diameter catalyst clusters that define the size of wires produced by VLS growth. This approach was used to prepare bulk quantities of uniform single-crystal silicon and germanium nanowire...
متن کاملNovel, low-cost solid-liquid-solid process for the synthesis of α-Si3N4 nanowires at lower temperatures and their luminescence properties
Ultra-long, single crystal, α-Si3N4 nanowires sheathed with amorphous silicon oxide were synthesised by an improved, simplified solid-liquid-solid (SLS) method at 1150 °C without using flowing gases (N2, CH4, Ar, NH3, etc.). Phases, chemical composition, and structural characterisation using X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), transmission electron micr...
متن کاملImproving Gas Sensing Properties of Tin Oxide Nanowires Palladium-Coated Using a Low Cost Technique
Thin films of SnO2 nanowires were successfully prepared by using chemical vapor deposition (CVD) process on quartz substrates. Afterwards, a thin layer of palladium (Pd) as a catalyst was coated on top of nanowires. For the deposition of Pd, a simple and low cost technique of spray pyrolysis was employed, which caused an intensive enhancement on the sensing response of fabricated sensors...
متن کامل