Development of Touch Probing System Using a Fiber Stylus
نویسندگان
چکیده
Hiroshi Murakami 1,*, Akio Katsuki 2 and Takao Sajima 2 1 Department of Mechanical Systems Engineering, Faculty of Environmental Engineering, The University of Kitakyushu, 1-1 Hibikino, Wakamatsu-ku, Kitakyushu, Fukuoka 808-0135, Japan 2 Department of Mechanical Engineering, Faculty of Engineering, Kyushu University, 744 Motooka, Nishi-ku, Fukuoka 819-0395, Japan; [email protected] (A.K.); [email protected] (T.S.) * Correspondence: [email protected]; Tel.: +81-93-695-3201
منابع مشابه
Probing System Characteristics in Coordinate Metrology
This paper aims at studying the effect of the dynamic errors on surface measurements using three different types of touch trigger probes attached to a bridge-type-CMM. Unforeseeable dynamic root errors of a ductile touch trigger probing system have been characterized theoretically and experimentally as well. The results were employed in validating a developed analytical twodimensional-model (2D...
متن کاملA scanning contact probe for micro CMM
A new high precision contact scanning probe possible to measure miniature components on a micro/nano-CMM is proposed. This contact probe is composed of a fiber stylus with a ball tip, a floating plate and focus sensors. The ball tip is fabricated using optical fiber with melting and solidification processes. The stylus is attached to a floating plate, which is connected to the probe housing via...
متن کاملReflective Haptics: Enhancing Stylus-Based Interactions on Touch Screens
In this paper, we introduce the prototype of a low cost haptically augmented stylus for pen computing on touch screens. The stylus supports human-computer interaction through a dynamic haptic feedback. This reflective feedback is generated by a magnetically operated brake system. The feedback actuator is integrated in the stylus. Therefore, the pen supports the use of multiple styli on a single...
متن کاملFinger-Stylus for Non Touch-Enable Systems
Since computer was invented, people are using many devices to interact with computer. Initially there were keyboard, mouse etc. but with the advancement of technology, new ways are being discovered that are quite usual and natural to the humans like stylus, touch-enable systems. In the current age of technology, user is expected to touch the machine interface to give input. Hand gesture is such...
متن کاملAssembled Cantilever Fiber Touch Trigger Probe for Three-Dimensional Measurement of Microstructures
In this paper, an assembled cantilever fiber touch trigger probe was developed for three-dimensional measurements of clear microstructures. The probe consists of a shaft assembled vertically to an optical fiber cantilever and a probing sphere located at the free end of the shaft. The laser is emitted from the free end of the fiber cantilever and converges on the photosensitive surface of the ca...
متن کامل