Friction Stir Processing of 304L Arc Welds
نویسنده
چکیده
منابع مشابه
Effect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding
The purpose of this study was to examine the effect of adding Nano particles such as Nano Carbon Tube during Friction Stir Welding (FSW) on dissimilar Al alloy joints. More specifically, both FSW and Friction Stir Processing (FSP) were performed simultaneously to investigate the effect of adding Nano particles on mechanical properties and microstructure of the weld zone for joining AA5754-H22 a...
متن کاملEffects of Friction Stir Processing on the Microstructure and Mechanical Properties of Fusion Welded 304L Stainless Steel
A variation of FSW, friction stir processing (FSP), has been used to modify selected regions of materials to enhance specific properties while eliminating fusion welding defects such as porosity, cracking, and the cast microstructure. The combination of fusion welding defects and high tensile residual stresses caused by the solidification of the molten weld pool adversely affect the post weld s...
متن کاملEffect of nanoparticles addition on dissimilar joining of aluminum alloys by friction stir welding
The purpose of this study was to examine the effect of adding Nano particles such as Nano Carbon Tube during Friction Stir Welding (FSW) on dissimilar Al alloy joints. More specifically, both FSW and Friction Stir Processing (FSP) were performed simultaneously to investigate the effect of adding Nano particles on mechanical properties and microstructure of the weld zone for joining AA5754-H22 a...
متن کاملNumerical simulation of transient temperature and residual stresses in friction stir welding of 304L stainless steel
Three-dimensional nonlinear thermal and thermo-mechanical numerical simulations are conducted for the friction stir welding (FSW) of 304L stainless steel. The finite element analysis code—WELDSIM, developed by the authors specifically for welding simulation, was used. Two welding cases with tool rotational speeds of 300 and 500 rpm are analyzed. The objective is to study the variation of transi...
متن کاملTexture development in friction stir welds
The shear textures that develop in friction stir welds are reviewed and discussed. In all the materials examined, including face centred cubic (fcc), body centred cubic (bcc) and hexagonal close-packed (hcp) materials, friction stir welding produces a predominant shear texture with the close-packed directions aligned with the shear direction (SD) and the close-packed plane normal perpendicular ...
متن کامل