Calibration and characterisation with a new laser-based magnetostriction measurement system
نویسنده
چکیده
A laser-based magnet measurement system has been developed to measure the magnetostrictive strain of large cylindrical samples. The measurement system incorporates a solenoid capable of generating a maximum magnetic field intensity of 3000 Oe and a laser displacement sensor. For calibration and evaluation purposes, the positive magnetostrictions of two different types of giant magnetostrictive Tb–Dy–Fe-based materials were accessed with this system. A magnetostrictive strain of 622 ppm was obtained at 3000 Oe for TbxDy1-xFe2-y, compared with 725 ppm for Tb0.27Dy0.73Fe2. A rod of sintered cobalt ferrite was also measured. This exhibited negative magnetostriction, with a maximum contraction of 260 ppm at 3000 Oe.
منابع مشابه
A New Approach to Self-Localization for Mobile Robots Using Sensor Data Fusion
This paper proposes a new approach for calibration of dead reckoning process. Using the well-known UMBmark (University of Michigan Benchmark) is not sufficient for a desirable calibration of dead reckoning. Besides, existing calibration methods usually require explicit measurement of actual motion of the robot. Some recent methods use the smart encoder trailer or long range finder sensors such ...
متن کاملVersatile and compact capacitive dilatometer
We describe the design, construction, calibration, and operation of a relatively simple differential capacitive dilatometer suitable for measurements of thermal expansion and magnetostriction from 300 to below 1K with a low-temperature resolution of about 0.05Å. The design is characterized by an open architecture permitting measurements on small samples with a variety of shapes. Dilatometers of...
متن کاملError Analysis, Design and Modeling of an Improved Heterodyne Nano-Displacement Interferometer
A new heterodyne nano-displacement with error reduction is presented. The main errors affecting the displacement accuracy of the nano-displacement measurement system including intermodulation distortion error, cross-talk error, cross-polarization error and phase detection error are calculated. In the designed system, a He-Ne laser having three-longitudinal-mode is considered as the stabiliz...
متن کاملLaser-Video Scanner Calibration without the use of a frame store
Abstract We present a new calibration method for a structured light surface scanner. The new method uses a model-based calibration, accounting for laser stripe and translation stage alignment and the internal and external camera parameters. The inclusion of non-linear radial distortion in the camera model gives an improvement in the calibration accuracy over a linear model. The method has been ...
متن کاملTrace Amounts Determination of Vanadium (V) Using a New Kinetic-Catalytic Reaction System
This study describes a new simple, sensitive and selective catalytic kinetic spectrophotometricmethod for the determination of vanadium (V). The method is based upon the catalytic effect ofvanadium (V) on the oxidation of Carminic acid by bromate in sulfuric acid media. The reaction wasfollowed spectrophotometrically by measuring the decrease in absorbance at 490 nm and thedependence of sensiti...
متن کامل