Shear bond strength of orthodontic brackets bonded using halogen light and light-emitting diode at different debond times.
نویسندگان
چکیده
The aim of this in vitro study was to compare the photoactivation effects of QTH (Quartz-Tungsten-Halogen) and LED (Light-Emitting Diode) on the SBS (Shear Bond Strength) of orthodontic brackets at different debond times. Seventy-two bovine lower incisors were randomly divided into two groups according to the photoactivation system used (QTH or LED). The enamel surfaces were conditioned with Transbond self-etching primer, and APC (Adhesive Pre-Coated) brackets were used in all specimens. Group I was cured with QTH for 20 s and Group II with LED for 10 s. Both groups were subdivided according to the different experimental times after bonding (immediately, 24 h and 7 days). The specimens were tested for SBS and the enamel surfaces were analyzed according to the Adhesive Remnant Index (ARI). The statistical analysis included the Tukey's test to evaluate the main effects of photoactivation and debond time on SBS. The Chi-square test was used to compare the ARI values found for each group, and no statistically significant difference was observed. The debond time of 7 days for QTH photoactivation showed statistically greater values of SBS when compared to the immediate and 24 h periods. There was no statistically significant difference between the QTH and LED groups immediately and after the 24 h period. In conclusion, bonding orthodontic brackets with LED photoactivation for 10 s is suggested because it requires a reduced clinical chair time.
منابع مشابه
The effect of thermocycling and debonding time on the shear bond strength of different orthodontic brackets bonded with light-emitting diode adhesive (In vitro study)
Background: Thermocycling simulates the temperature dynamics in the oral environment. This in vitro study done to measure and compare the effect of thermocycling on the shear bond strength of stainless steel and sapphire brackets bonded to human enamel teeth using light cured orthodontic adhesive and debonded at various time, and to measure adhesive remnant index after debonding. Materials and ...
متن کاملComparison of shear bond strength of stainless steel brackets bonded with three light- cured adhesives
Introduction: The bonding process of the brackets to enamel has been a critical issue in orthodontic research. The purpose of this study was to evaluate the shear bond strength of 3 light-cured adhesives (transbond XT, Z250, light bond). Materials &Methods: In this study sixty extracted human premolars were collected and randomly divided into 3 test groups. All teeth were etched by 37% phosp...
متن کاملShear Bond Strength of Metallic Brackets Photo-activated with Light-emitting Diode (led) at Different Exposure Times
The purpose of this study was to compare the shear bond strength of orthodontic metallic brackets photo-activated with two different light-curing sources at different exposure times: halogen light (XL 1500, 3M ESPE) and LED light (Ortholux, 3M Unitek). Sixty bovine permanent lower incisors were inserted into PVC tubes containing plaster. The buccal surfaces were cleaned with pumice and water, a...
متن کاملShear Bond Strength and Temperature Rise of Orthodontic Brackets Bonding by Using a New 3-Second LED Mode
Objective: The aim of this study was to evaluate the effects of different curing times of a light-emitting diode (LED) on the bond strength of stainless steel brackets and to evaluate the temperature changes in the pulp chamber during curing of the composite. Materials and Method: Caries-free human first premolar and maxillary central incisor teeth extracted for orthodontic and periodontal reas...
متن کاملThe effect of the blue light diode laser on shear-peel bond strength of orthodontic brackets with varying curing time and distance
THE EFFECT OF THE BLUE LIGHT DIODE LASER ON SHEAR-PEEL BOND STRENGTH OF ORTHODONTIC BRACKETS WITH VARYING CURING TIME AND DISTANCE Kamran Shaikh, DDS June 17,2010 Background: Light cured composite resin can be time consuming for bonding orthodontic brackets. A new Blue light diode laser may reduce curing times for composite resins. Hypothesis: The laser will achieve similar bond strengths in ha...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
عنوان ژورنال:
- Brazilian oral research
دوره 24 1 شماره
صفحات -
تاریخ انتشار 2010