The Effect of Impedance Mismatch on Phase Linearity of GCPW Loaded Transmission Lines and Shunt Stubs
نویسندگان
چکیده
This paper presents a study on the effect of impedance mismatch on phase linearity (group delay variations) in grounded coplanar waveguide (GCPW) structures. Two 400 ps GCPW delay lines were designed using a short circuited stub and a transmission line. The structures were simulated over a wide frequency range (0.1 GHz5 GHz) using both ADS circuit model and CST electromagnetic simulation tool. Based on mathematical analysis and simulation results, impedance mismatch appears to have a large effect on group delay variations in stubs when compared to transmission lines. The simulated time delay of the short circuited stub shows a maximum delay deviation of ±0.75% and ±7.4% for 1.6% and 5.8% impedance mismatch values, respectively. On the other hand, the transmission delay line simulation results show only ±0.1% and ±1.5% for the same impedance mismatch. For the electromagnetic simulation, the presented results indicate even larger variation of time delay for GCPW short stub as it reaches ±3.75% and ±7.5% at 2 GHz and 4.5 GHz for 1.6% impedance mismatch, respectively.
منابع مشابه
Development of Forward-wave Directional Couplers Loaded by Periodic Shunt Shorted Stubs
In this paper a new procedure for designing forward-wave directional couplers using periodic shunt short circuited stubs is proposed. A new type of cell using these stubs, which enlarge the phase difference between even- and odd modes of a uniform microstrip coupled line is introduced. Using the equivalent circuit model for even- and odd-modes of the proposed cell, the elements of the ABCD tra...
متن کاملWideband Tri-band Filter Design using Stepped-impedance Stub Resonators
This letter presents a wideband tri-passband filter in which tri-section stepped-impedance shunt-stubs are used as tri-mode resonators, connected by transmission lines. Developed from the topology of quarter-wavelength stub filters, these filters have much wider passbands compared to many other designs published. The stepped-impedance stubs also contribute transmission zeros between the passban...
متن کاملA Compact UWB Bandpass Filter with High Selectivity and Dual Notched-Band
A novel compact-sized ultra-wideband (UWB) bandpass filter (BPF) is proposed in this paper. The proposed BPF is highly selective and is able to eliminate WLAN signals from 5.15-5.35 GHz, and downlink of X-band satellite communication signals from 7.25-7.75 GHz. Generally, a multiple-mode resonator (MMR), comprised of a U-shaped line, with two high impedance stubs connected to it, and one steppe...
متن کاملSynthesis of Slow-Wave Structures Based on Capacitive-Loaded Lines through Aggressive Space Mapping (ASM)
This paper is focused on the automated synthesis of slow-wave structures based on microstrip lines loaded with patch capacitors. Thanks to the presence of the shunt capacitors, the effective capacitance of the line is enhanced, and the phase velocity of the structure can be made significantly smaller than the one of the unloaded line. The target is to achieve the layout of the slow-wave structu...
متن کاملA Note on the Modeling of Transmission-Line Losses
We consider uniform lossy transmission lines characterized by their primary parameters. Exact and approximate formulas for the characteristic impedance and propagation coefficient are reviewed and discussed for low-loss lines. Approximating the characteristic impedance by its real part can lead to erroneous results for the input impedance of shortand open-circuited stubs. This problem is analyt...
متن کامل