The Ultimate Value
ثبت نشده
چکیده
A book which tells the story of the children's early life, the horrors endured on the way to Belsen and in the camp, can hardly fail to be moving. This book is intensely so. The patient handling of the children after their arrival in Ireland and the gradual building of confidence is not the least moving section. This may be due to a certain lack of "expertise" in the handling of the early part of the book which disappears when Dr. Collis allows himself to materialise from the third to the first person. The sincerity of the writing leaves a deep impression. M.A-
منابع مشابه
Intelligent prediction of heating value of coal
The gross calorific value (GCV) or heating value of a sample of fuel is one of the important properties which defines the energy of the fuel. Many researchers have proposed empirical formulas for estimating GCV value of coal. There are some known methods like Bomb Calorimeter for determining the GCV in the laboratory. But these methods are cumbersome, costly and time consuming. In this paper, m...
متن کاملDetermination of the largest pit with the non-negative net profit in the open pit mines
The determination of the Ultimate Pit Limit (UPL) is the first step in the open pit mine planning process. In this stage that parts of the mineral deposit that are economic to mine are determined. There are several mathematical, heuristic and meta-heuristic algorithms to determine UPL. The optimization criterion in these algorithms is maximization of the total profit whilst satisfying...
متن کاملFriction stir welding of accumulative roll bonded single phase brass
Single phase brass strips with 2 mm thickness were severely deformed through 1 and 3 cycles of accumulative roll bonding process (ARB). ARB process effectively increased the hardness, yield strength, and the ultimate strength of the processed materials. The hardness of processed material increased from 95 HV in annealed material to 225 HV in 3 cycle ARBed material, and the yielding and ultimate...
متن کاملFriction stir welding of accumulative roll bonded single phase brass
Single phase brass strips with 2 mm thickness were severely deformed through 1 and 3 cycles of accumulative roll bonding process (ARB). ARB process effectively increased the hardness, yield strength, and the ultimate strength of the processed materials. The hardness of processed material increased from 95 HV in annealed material to 225 HV in 3 cycle ARBed material, and the yielding and ultimate...
متن کاملA new algorithm for optimum open pit design: Floating cone method III
Ultimate limits of an open pit, which define its size and shape at the end of the mine’s life, is the pit with the highest profit value. A number of algorithms such as floating or moving cone method, floating cone method II and the corrected forms of this method, the Korobov algorithm and the corrected form of this method, dynamic programming and the Lerchs and Grossmann algorithm based on grap...
متن کاملInvestigation of Bishop’s and Janbu’s Models Capabilities on Slope Stability Problems with Special Consideration to Open-Pit Mining Operations
One of the most effective parameters in economics of open-pit mines is the pit slope angle, so that the slope angle more than the optimum value increases the probability of a large failure in the pit wall and the slope angle less than the optimum value leads to increasing stripping ratio and reducing net present value of mine. Therefore, in this paper, considering the limit equilibrium methods ...
متن کامل