Sobolev Gradient Type Preconditioning for the Saint-venant Model of Elasto-plastic Torsion
نویسندگان
چکیده
In this paper a suitable Laplacian preconditioner is proposed for the numerical solution of the nonlinear elasto-plastic torsion problem. The aim is to determine the tangential stress in cross-sections under a given torsion, for which the physical model is based on the Saint Venant model of torsion and the single curve hypothesis for the connection of strain and stress. The proposed iterative solution of the arising nonlinear elliptic problem is achieved by combining the advantages of Laplacian preconditioners with the qualitatively favourable aspects of the strong formulation. Error estimate is given for the convergence of the method. Finally, a numerical example is given.
منابع مشابه
Crack analysis of an orthotropic circular bars reinforced by a magnetic coating under Saint-Venant torsion
This paper presents an analytical solution for an orthotropic circular cross section bar with a magnetic coating weakened by multiple arbitrary oriented cracks under Saint-Venant torsion by means of the distributed dislocation technique. At first, the solution of the orthotropic bar with a magnetic coating weakened by a Volterra-type screw dislocation is achieved with the aid of the finite Four...
متن کاملSaint-Venant torsion of non-homogeneous anisotropic bars
The BEM is applied to the solution of the torsion problem of non-homogeneous anisotropic non-circular prismatic bars. The problem is formulated in terms of the warping function. This formulation leads to a second order partial differential equation with variable coefficients, subjected to a generalized Neumann type boundary condition. The problem is solved using the Analog Equation Method (AEM)...
متن کاملElastoplastic torsion of hollow FGM circular shaft
In many cases, a torsional shaft may be a thick-walled radially inhomogeneous cylindrical object. The hollow shafts made of functionally graded materials (FGMs) are such kind of compositions which were studied in this paper. Cylindrical FG shafts are composed of ceramic and metallic parts with power function distribution across the radial direction. The ceramic phase is isotropic elastic and th...
متن کاملSpreading of Plastic Zones in Functionally Graded Spherical Tanks Subjected to Internal Pressure and Temperature Gradient Combinations
Thermo-Elasto-Plastic analyses of thick-walled spherical tanks made of functionally graded materials are investigated analytically. These tanks are subjected to positive or negative temperature gradient and internal pressure loadings separately or simultaneously. The power law modeling has been used for through-the-thickness variation of mechanical properties. von Mises yield criterion and Elas...
متن کاملA 3D elasto-plastic FEM program developed for reservoir Geomechanics simulations: Introduction and case studies
The development of yielded or failure zone due to an engineering construction is a subject of study in different disciplines. In Petroleum engineering, depletion from and injection of gas into a porous rock can cause development of a yield zone around the reservoir. Studying this phenomenon requires elasto-plastic analysis of geomaterial, in this case the porous rocks. In this study, which is a...
متن کامل