Catalytic ozonation of metolachlor under continuous operation using nanocarbon materials grown on a ceramic monolith.
نویسندگان
چکیده
The catalytic ozonation of the herbicide metolachlor (MTLC) was tested using carbon nanomaterials as catalysts. Multiwalled carbon nanotubes were used in semi-batch experiments and carbon nanofibres grown on a honeycomb cordierite monolith were tested in continuous experiments. The application of the carbon catalyst was shown to improve the mineralization degree of MTLC and to decrease the toxicity of the solution subject to ozonation. Degradation by-products were also followed in order to compare the two processes. The application of the carbon coated monolith to the continuous ozonation process was shown to have potential as it improved the TOC removal from 5% to 35% and decreased the inhibition of luminescent activity of Vibrio Fischeri from 25% to 12%.
منابع مشابه
Optimization of the catalytic ozonation process using copper oxide nanoparticles for the removal of benzene from aqueous solutions
The current study aimed to examine the overall feasibility of the use of copper oxide nanoparticles (CuO-NPs) as a catalyst in ozonation process for the removal of benzene from aqueous solutions under experimental conditions. This experimental study was conducted on a laboratory scale reactor in a semi-batch mode. The effect of critical operating parameters such factors as pH, concentration of ...
متن کاملComparing activated carbon and magnetic activated carbon in removal of linear alkylbenzene sulfonate from aqueous solution by heterogeneous catalytic ozonation process
Activated carbon from pine cone (PCAC) was used as a precursor to prepare Fe3O4/magnetic activated carbon (MPCAC). Here, the removal of linear alkylbenzene sulfonate (LAS) was studied using catalytic ozonation process (COP) in exposure to MPCAC. Subsequently, it was compared with PCAC. Moreover, the effects of solution's initial pH, catalyst dosage, and the time of ozonati...
متن کاملبررسی اثر زمان ماند، دوز ازن و رطوبت نسبی بر کارایی فرایند ازنزنی کاتالیزوری در حذف زایلن از جریان هوای آلوده
Background and aimsThe catalytic ozonation is an efficient process for the degradation of volatile organic compounds from contaminated air stream. This study was aimed at investigating the efficacy of catalytic ozonation process in removal of xylene from the polluted air stream andthe influence of retention time (gas flow rate), inlet ozone dose and relative humidity on this performanceMethodst...
متن کاملDegradation Efficiency and Kinetic Study of Phenol by Catalytic Ozonation Process in the Presence of Calcined Scallop Shell
Abstract Introduction: Phenol is amongst the dangerous environmental pollutants, which due to its presence in the industrial effluents, should be removed. Objective: The aim of this study was to evaluate the efficiency of catalytic ozonation by calcined scallop shell as a catalyst in the removal of phenol Materials and Methods: Scallop shells were collected from the coast of Caspian Sea in G...
متن کاملModeling And Simulation of Gas Flow Velocity In Catalytic Converter With Porous
Stringent emission regulations around the world necessitate the use of high-efficiency catalytic converters in vehicle exhaust systems. Experimental studies are more expensive than computational studies. Also using computational techniques allows one to obtain all the required data for the Catalytic Converter, some of which could not be measured. In the present work, Geometric modeling ceramic ...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Journal of hazardous materials
دوره 239-240 شماره
صفحات -
تاریخ انتشار 2012