Needle-Bonded Electromagnetic Shielding Thermally Insulating Nonwoven Composite Boards: Property Evaluations
نویسندگان
چکیده
Complicated environmental problems inevitably arise when technology advances. One major environmental problem is the presence of electromagnetic radiation. Long-term exposure to electromagnetic radiation can damage people’s health in many ways. Therefore, this study proposes producing composite boards with electromagnetic shielding effectiveness and thermal insulation by utilizing the structures and properties of materials. Different combinations of flame-retardant polyester fiber (FR fiber), recycled far-infrared polyester fiber (FI fiber), and 4D low-melting-point fibers (LM fiber) were made into flame-retardant and thermally insulating matrices. The matrices and carbon fiber (CF) woven fabric in a sandwich-structure were needle-punched in order to be tightly compact, and then circularly heat dried in order to have a heat set and reinforced structure. The test results indicate that Polyester (PET)/CF composite boards are mechanically strong and have thermal insulation and electromagnetic shielding effectiveness at a frequency between 0.6 MHz and 3 GHz.
منابع مشابه
Development Trends in Conductive Nano-Composites for Radiation Shielding
Our paper reviews the use of conductive polymer composite materials in various applications for semi conductive, static-dissipative, anti-corrosive, electromagnetic interference (EMI) shielding and stealth composite coatings. The composite consists of conductive fillers and the insulating polymer network. The composite becomes electrically conductive as the filler content exceeds a certain crit...
متن کاملBehavior Analysis of the Nonwoven Needle-Punched Polyester Fabrics Due to Compression Loading
متن کامل
Preparation of High Mechanical Performance Nano-Fe3O4/Wood Fiber Binderless Composite Boards for Electromagnetic Absorption via a Facile and Green Method
Fe₃O₄/wood fiber composites are prepared with a green mechanical method using only distilled water as a solvent without any chemical agents, and then a binderless composite board with high mechanical properties is obtained via a hot-press for electromagnetic (EM) absorption. The fibers are connected by hydrogen bonds after being mechanically pretreated, and Fe₃O₄ nanoparticles (NPs) are attache...
متن کاملبررسی عوامل موثر بر اثربخشی حفاظ الکترومغناطیسی نانوکامپوزیتی در باند فرکانسی X ا(GHz 5/12-8)
Introduction: Due to the importance of engineering controls for prevention of microwave exposure, this study was conducted to design and constract a novel electromagnetic shielding and also to examine the factors influencing shielding efficacy in X band frequency range. Material and Method: This study used Resin Epoxy as matrix and nano-Nickel Oxide as filler to prepare the composite plates ...
متن کامل