FMECA Analysis (A Heuristic Approach) For Frequency of Maintenance and Type of Maintenance
نویسندگان
چکیده
Malay Niraj, Praveen Kumar, Dr. A.Mishra Abstract -Present study is an approach for f inding the suitable maintenance practice and frequency of maintenance with the help of criticality factor of equipment it is based on failure mode evaluation and criticality analysis. Criticality means the failure probability of the equipment is very high. The miner failure of critical equipment may leads to sever impact on the performance of the equipment. So critical equipment needs very high degree of maintenance activity and maintenance frequency to prevent any failure. This model has implemented in process industry and many OEE like factor has been improved.
منابع مشابه
Multi-factor failure mode critically analysis using TOPSIS
The paper presents a multi-factor decision-making approach for prioritizing failure modes as an alternative to traditional approach of failure mode and effect analysis (FMEA). The approach is based on the ‘technique for order preference by similarity to ideal solution’ (TOPSIS). The priority ranking is formulated on the basis of six parameters (failure occurrence, non-detection, maintainability...
متن کاملارزیابی مخاطرات کوره یک کارخانه سیمان با روش آنالیز بحرانیت حالات شکست و اثرات آن (FMECA)
Background and aims : Technique of Failure Modes Effects and Criticality Analysis, FMECA, is a method for identifying and analyzing all potential failure modes of a system.This technique is used to prevent failures and to reduce their effects on the system . The main goal of this study was identifying and analyzing of the potential failure modes and assessing the effects of failures in the ce...
متن کاملA Dynamic Fuzzy Expert System Based on Maintenance Indicators for Service Type Selection of Machinery
Due to the multiplicity of standards and complex rules; maintenance, repair and servicing of machinery could be done only by the fully qualified and proficient experts. Since the knowledge of such experts is not available all times, using expert systems can help to improve the maintenance process. To address this need and the uncertainty of the maintenance process indicators, this research prop...
متن کاملMaintenance management decision model for preventive maintenance strategy on production equipment
In industries, Preventive Maintenance (PM) is not a new practice to minimise the sudden breakdown of production machine. PM will be performed at predetermine intervals to provide a balance between failure cost and component utilisation (aging). However, most of PM interval is based on experience or original equipment manufacturer (OEM) recommendations. Consequently, the benefits from PM are not...
متن کاملA multi-stage stochastic programming for condition-based maintenance with proportional hazards model
Condition-Based Maintenance (CBM) optimization using Proportional Hazards Model (PHM) is a kind of maintenance optimization problem in which inspections of a system relevant to its failure rate depending on the age and value of covariates are performed in time intervals. The general approach for constructing a CBM based on PHM for a system is to minimize a long run average cost per unit of time...
متن کامل