Concentration of lead, cadmium, and iron in sediment dust and total suspended particles before and after initialisation of integral production in iron and steel work plant Zenica.

نویسندگان

  • Halim Prcanović
  • Mirnes Duraković
  • Sanela Beganović
چکیده

Poor air quality is a common fact for all areas with base industry. The city of Zenica was once the metallurgical centre of Ex-Yugoslavia and is therefore highly polluted at present. Air pollution peaked in 1987 when average concentration of pollutants was extremely high (daily average concentration of SO(2) was 1800 μg m(-3)). With the beginning of the war in 1992, integral production in the steel work plant was shut down, to be re-launched in 2008. Limit values for iron do not exist, but iron has been monitored in Zenica for the past 28 years because of the presence of steel works. Concentrations of cadmium and lead have also been measured because they are very much present in polluted areas with steel works. The concentration of mentioned elements in air deposit and total suspended particles before and after integral production in the steel work plant was re-launched is the subject of this paper. Total suspended particles were measured in two locations using German standard VDI 2463 Blatt 4. Sediment dust was measured in nine locations using Bergerhoff method. The concentration of iron, lead, and cadmium was performed in the chemical laboratory of the Metallurgical Institute "Kemal Kapetanović" Zenica using standard methods. Higher concentrations of these parameters during the period of integral production clearly point to the impact of steel works on Zenica valley.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Production and Crystallization Behavior of an Iron Rich Glass–Ceramic Prepared by Ironmaking and Steelmaking Wastes

Using wastes as starting raw materials is a common method to reduce the production costs and the environmental pollution problems arising from such wastes. In this study the production and crystallization behavior of an iron rich glass prepared by iron and steel making wastes has been investigated. The raw materials used, were the blast furnace slag, the blast furnace dust, converter slag and s...

متن کامل

Choice of Dust Collectors Based on Energy and Environmental Degradation in Steel Industries

Environmental degradation and Economic growth are two important proofs in sustainable development which are followed by steel industry. In this case, energy and environmental damages as sustainability patterns of environment have been investigated in three different dust collectors to select the most environmentally suitable dust collector for electric furnace. In this article, the consumption ...

متن کامل

The Evaluation of Deferasirox on Hematological Parameters after Lead Administration

Background: Metals such as iron, zinc, and copper are critical and necessary for the survival of all living organisms, whereas xenobiotic metals such as lead, cadmium, mercury, and arsenic have no known biologic role. Any metals in high doses can have toxic effects. The aim of this work was to evaluate the hematological changes induced by lead as a toxic metal and characterize the potential eff...

متن کامل

Evaluation of heavy metals from desert dust in rangeland ecosystems of Khuzestan province

Extended abstract 1- Introduction Desert dust is formed under the influence of special weather and environmental conditions in desert areas and enters the atmosphere. Local hurricanes caused by surface air instability, passing through dry deserts, remove silt and sand particles from the surface and enter the atmosphere. Desert dust physically, in addition to its ecological effects such as lun...

متن کامل

Life cycle assessment of steel production from iron scrap: a case study at a steel plant

Background and Objective: The steel industry is the world's largest consumer of energy. A large amount of iron waste is produced annually, which its use in the steel industry can be economic. The purpose of this study was to investigate the environmental impacts of the steelmaking from iron scrap as a raw material using a life cycle assessment (LCA) method. Materials and Methods: Simapro softw...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Arhiv za higijenu rada i toksikologiju

دوره 63 2  شماره 

صفحات  -

تاریخ انتشار 2012