Clutch-to-clutch Shift Control of an Automatic Transmission with Proportional Pressure Control Valves
نویسندگان
چکیده
For a new kind of automatic transmissions using proportional pressure valves to control the clutches directly, a two-degree-of-freedom controller is designed for clutch slip control during the inertia phase of the shift process. The controller is designed based on a low order linear model which is derived from dynamics of the proportional pressure control valve and the vehicle drive line. The feedback gain is calculated by robust pole assignment methods while the feed-forward compensator aims to improve system response. Finally, the designed controller is tested on an AMESim powertrain simulation model. Simulation results show that the rotational speed difference of clutch can track the desired trajectory well, and shift shock can be reduced by designing suitable feed-forward compensator.
منابع مشابه
Simulation and investigation of the effect of oil flow rate, electric signal of flow control valve and controller on the performance of a wet clutch
The using of wet clutches and hydraulic control devices causes a smoothly torque transfer. In this study, a wet clutch was simulated in Simulink MATLAB software. Firstly the mechanical section of the clutch was modeled and then the hydraulic section was simulated with the addition of electric flow control valve and inlet and outlet of oil flow. Finally, the effects of oil flow rate, electric s...
متن کاملارزیابی ارگونومیک پدال کلاچ در چند مدل از خودروهای رایج درخطوط تاکسیرانی شهر تهران
Background and aims: Clutch pedal is one of the most important control systems of automobile. As a foot controller due to the location and mechanisms of action, in case of improper design pedal clutch can reduce driver fatigue, as well as the comfort and safety of the vehicle. In the present research, clutch comfort of some common models of vehicles in taxi routes in Tehran were investigated fr...
متن کاملDetailed Model of a Hydromechanical Double Clutch Actuator with a Suitable Control Algorithm
This paper presents the detailed model of a double clutch actuator with a suitable control algorithm. Firstly, there is an introduction into the theory of a double clutch transmission and the aim of this project. The simulation model with a Dymola R © and a MATLAB R ©/Simulink R © part is discussed. The library of a vehicle model with a highly detailed hydromechanical clutch is introduced, whic...
متن کاملH∞ gearshift control of a dual clutch based on uncertain TS models
The dual clutch transmission was introduced in vehicles to improve driving comfort compared with manual transmissions, and performances, fuel efficiency compared with automatic transmissions. The dual clutch transmission allows to shift gears quickly, comfortably and without interruption in traction. In the dual clutch transmission, the management of the dual clutch in the gearshift phase is a ...
متن کاملReal World Modeling and Nonlinear Control of an Electrohydraulic Driven Clutch
In this paper, a complete model of an electro hydraulic driven dry clutch along with its performance evaluation has elucidated. Through precision modeling, a complete nonlinear physical and full order sketch of clutch has drawn. Ultimate nonlinearities existent in the system prohibits it from being controlled by conventional linear control algorithms and to compensate the behavior of the sy...
متن کامل