Voiding and Reliability of Assembly of BGA with SAC and 57Bi42Sn1Ag Alloys
نویسندگان
چکیده
• Share with a friend Dr. Ning-Cheng Lee, Vice President of Technology, Indium Corporation, is a world-renown soldering expert and an SMTA Member of Distinction. He has nearly 30 years of experience in the development of fluxes and solder pastes for SMT industries. He has extensive experience in the development of high temperature polymers, encapsulants for microelectronics, underfills, and adhesives.
منابع مشابه
Solder Joint Reliability of Pb-free Sn-Ag-Cu Ball Grid Array (BGA) Components in Sn-Pb Assembly Process
For companies that choose to take the Pb-free exemption under the European Union’s RoHS Directive and continue to manufacture tin-lead (Sn-Pb) electronic products, there is a growing concern about the lack of Sn-Pb ball grid array (BGA) components. Many companies are compelled to use the Pb-free Sn-Ag-Cu (SAC) BGA components in a Sn-Pb process, for which the assembly process and solder joint re...
متن کاملBoard Level Reliability Comparison of Lead Free Alloys
Board level reliability testing was used to compare six lead free alloys to tin-lead eutectic using a 98 ball Wafer Level Chip Scale Package (WLCSP). The component had a 0.5mm Ball Grid Array (BGA) pitch, and Al/NiV/Cu pad metallization. Thermal cycling (4 conditions), cyclic bend (2 conditions), cyclic drop (3 conditions), and solder joint array tensile testing (3 conditions) were utilized to ...
متن کاملiNEMI Pb-FREE ALLOY ALTERNATIVES PROJECT REPORT: STATE OF THE INDUSTRY
Recently, the industry has seen an increase in the number of Pb-free solder alloy choices beyond the common neareutectic Sn-Ag-Cu (SAC) alloys. New wave solder alloys have been developed with the intent of addressing concerns with copper dissolution, barrel fill, wave solder defects, and the high cost of alloys containing significant amounts of silver. Concerns regarding the poor drop/shock per...
متن کاملLead-Free Solder Joint Voiding: The Causes are Starting to Surface
Much research work has been conducted into the cause of voiding and Henkel has studied in-depth the materials relationship to voiding. When using SAC alloys, in order to achieve the desired wetting and ultimate interconnection, the fluxes in the paste formulations have to operate at higher temperatures than those of their SnPb counterparts. Not only do the fluxes work harder, the SAC alloys als...
متن کاملRELIABILITY ASSESSMENT OF REBALLED BGAs
The Printed Circuit Board (PCB) assembly domain has almost completed its transition to a lead-free environment. This shift has resulted in the obsolescence of tin-lead components. However, occasionally, on-going production or repair processes require SnPb components which are no longer available. Using a lead-free device in such cases could result in reliability concerns (due to the use of lead...
متن کامل