Comparison of PID Controller Tuning Methods
نویسندگان
چکیده
Proportional, Integral and derivative (PID) controllers are the most widely-used controller in the chemical process industries because of their simplicity, robustness and successful practical application. Many tuning methods have been proposed for PID controllers. Our purpose in this study is comparison of these tuning methods for single input single output (SISO) systems using computer simulation. Integral of the absolute value of the error (IAE) has been used as the criterion for comparison. These tuning methods have been implemented for first, second and third order systems with dead time and for two cases of set point tracking and load rejection.
منابع مشابه
Offline Auto-Tuning of a PID Controller Using Extended Classifier System (XCS) Algorithm
Proportional + Integral + Derivative (PID) controllers are widely used in engineering applications such that more than half of the industrial controllers are PID controllers. There are many methods for tuning the PID parameters in the literature. In this paper an intelligent technique based on eXtended Classifier System (XCS) is presented to tune the PID controller parameters. The PID controlle...
متن کاملA Novel Self-tuning Zone PID Controller for Temperature Control via a PLC code
S7-1200 with Tia Portal technology has become a Standard function of distributed controlsystems. Self-Tuning methods belong to Programmable Controllers (PLC) techniques. PLCtechniques contain software packages for advanced control based on mathematical methods. S7-1200 tools are designed to increase the Process Capacity, yield, and quality of products. Most ofthe present time digital industry r...
متن کاملDecentralized Fuzzy-PID Based Control Model for a Multivariable Liquid Level System
Multivariable liquid level control is essential in process industries to ensure quality of the product and safety of the equipment. However, the significant problems of the control system include excessive time consumption and percentage overshoot, which result from ineffective performance of the tuning methods of the PID controllers used for the system. In this paper, fuzzy logic was used to t...
متن کاملComparison of some Classical PID and Fuzzy Logic Controllers
The proportional-integral-derivative (PID) controller is tuned to find its parameters values. Generally most of the tuning methods depend mainly on the experimental approach of open-loop unit step response. The controller parameters can be found if the system truly can be approximated by First Order Plus-Dead Time (FOPDT). The performance of most of them deteriorates as the ratio of approximate...
متن کاملA Unified IMC based PI/PID Controller Tuning Approach for Time Delay Processes
This paper proposes a new PI/PID controller tuning method within filtered Smith predictor (FSP) configuration in order to deal with various types of time delay processes including stable, unstable and integrating delay dominant and slow dynamic processes. The proposed PI/PID controller is designed based on the IMC principle and is tuned using a new constraint and without requiring any approxima...
متن کامل