A Real Time Infrared Imaging System Based on DSP & FPGA
نویسندگان
چکیده
The principle, configuration, and the special features of an infrared imaging system are presented in this paper. The work has been done in two parts. First, the nonuniformity of IRFPA is detected using a processing system based on FPGA & microcontroller. The FPGA generates system timing and performs data acquisition, while the microcontroller reads the IRFPA data from FPGA and sends them to the computer. Afterwards the infrared imaging system is implemented based on DSP & FPGA. The DSP executes high level algorithms such as two–point nonuniformity correction. The FPGA here performs two functions: the first one is reading the IRFPA video output and sending it to DSP; the second function is reading the corrected data from DSP and sending them to video encoder which converts the digital data to the analog video signal. The experimental results show that the system is suitable for the real time infrared imaging with high quality and high precision.
منابع مشابه
Design and Implementation of Digital Demodulator for Frequency Modulated CW Radar (RESEARCH NOTE)
Radar Signal Processing has been an interesting area of research for realization of programmable digital signal processor using VLSI design techniques. Digital Signal Processing (DSP) algorithms have been an integral design methodology for implementation of high speed application specific real-time systems especially for high resolution radar. CORDIC algorithm, in recent times, is turned out to...
متن کاملReal Time Implementation of a License Plate Location Recognition System Based on Adaptive Morphology
License plate recognition (LPR) by using morphology has the advantage of resistance to brightness changes; high speed processing, and low complexity. However these approaches are sensitive to the distance of the plate from the camera and imaging angle. Various assumptions reported in other works might be unrealistic and cause major problems in practical experiences. In this paper we considered ...
متن کاملDesign and Realization of Short Range Defence Radar Target Tracking System Based on DSP/FPGA
This paper presents the hardware design of a real time tracking system based on DSP/FPGA regarding the research and development of a certain type of short range defence radar. In this tracking system, the FPGA is used as a floating point co-processor of the fixed point DSP, and the large amount of calculation of the debiased converted measurement Kalman Filter (DCMKF) algorithm is realized in F...
متن کاملThe design of DSP/FPGA based maneuvering target tracking system
Debiased converted measurement Kalman filter based IMM (IMM-DCMKF) algorithm is a commonly used maneuvering target tracking algorithm, which is combined with the interacting multiple model (IMM) and the debiased converted measurements Kalman filter (DCMKF). However, the computation complexity of this algorithm is large and the traditional realization of this algorithm using software can’t meet ...
متن کاملDesign and Implementation of a FPGA and DSP Based MIMO Radar Imaging System
The work presented in this paper is aimed at the implementation of a real-time multiple-input multiple-output (MIMO) imaging radar used for area surveillance. In this radar, the equivalent virtual array method and time-division technique are applied to make 16 virtual elements synthesized from the MIMO antenna array. The chirp signal generater is based on a combination of direct digital synthes...
متن کامل