Circuit Sizing and Supply-Voltage Selection for Low-Power Digital Circuit Design
نویسندگان
چکیده
This paper analyzes energy minimization of digital circuits operating at supply voltages above threshold and in the sub-threshold region. Circuit sizing and supply-voltage selection are simultaneously analyzed to determine where the minimum energy solution occurs. In this work we address the effects of architectural modifications on the design choices in different regions of operation. Two new architectural parameters are introduced that can be used for fast design comparison in the low power region of operation.
منابع مشابه
Low Dropout Based Noise Minimization of Active Mode Power Gated Circuit
Power gating technique reduces leakage power in the circuit. However, power gating leads to large voltage fluctuation on the power rail during power gating mode to active mode due to the package inductance in the Printed Circuit Board. This voltage fluctuation may cause unwanted transitions in neighboring circuits. In this work, a power gating architecture is developed for minimizing power in a...
متن کاملPower Supply and Current Modulation Circuits for Semiconductor Lasers
Design and construction of a stable current supply with protection circuits are described. The reported circuit provides a high-stable and high-level current variable from 0.5-1.2 A with the protect ion circuits to prevent over load current, voltage and off-range temperature operation. A detailed analysis of the circuit parameters is given and the time behaviors of the load voltage/current and ...
متن کاملResearch of Low Voltage Shore Power Supply Used on Shipping Based on Sliding Control
In order to solve the problem of fuel pollution, the diesel fuel for power generation of marine was abandoned and shore power supply have been proposed at the historic moment. The Shore Power Supply which needs transferring 380V/50Hz to 450V/60Hz is used on shipping who need this kind of power, so effectively curbs the emissions of pollution gas into the air, and achieves the purpose of improvi...
متن کاملDesign and Simulation of a New DC Power Supply Based on Dual Bridge Matrix Converter
A conventional high power DC power supply systems consist of a three-phase diode rectifier followed by a high frequency converter to supply loads at regulated DC voltage. These rectifiers draw significant harmonic currents from the utility, resulting in poor input power factor. In this paper, a DC power supply based on dual-bridge matrix converter (DBMC) with reduced number of switches is p...
متن کاملA New Approach for Low Voltage CMOS based on Current-controlled Conveyors
Abstract In his paper a new current-controlled conveyor (CCCII) in CMOS technology is presented. It features, low supply voltage (±0.7), low power consumption, low circuit complexity, rail to rail operation and wide range parasitic resistance ( ). The circuit has been successfully employed in a multifunction biquad filter. Simulation results by HSPICE show high performance of the circuit and c...
متن کامل