NEW BioCo BINDERS CONTAINING BIOPOLYMERS FOR FOUNDRY INDUSTRY
نویسنده
چکیده
B. Grabowska, M. Holtzer, R. Dańko, M. Górny, A. Bobrowski, E. Olejnik; AGH University of Science and Technology, Faculty of Foundry Engineering, Krakow, Poland Possibilities of cross-linking of new polymer binders from the BioCo group, their hardening in moulding sands at the application of cross-linking agents both physical and chemical are presented. Their thermal stability was determined. It was proved, that moulding sands bound by the BioCo binders are characterised by the compression strength (Rc) of an order of 2 MPa, and the bending strength (R u g) of 1 MPa, after 1 hour of a sample curing. The worked out BioCo binders are biodegradable and renewable in the part which was not completely burned. The investigated moulding sands with the BioCo binders are easily knocked out and have a good susceptibility for mechanical reclamation processes.
منابع مشابه
New Bicomponent Binders for Foundry Moulding Sands Composed of Phenol-furfuryl Resin and Polycaprolactone
The aim of this article is to test the properties of foundry moulding sands with a new bicomponent organic binder. The new binder is the composition of phenol-furfuryl resin, commonly used in foundry practice and biodegradable material – polycaprolactone. The paper presents the research of strength properties, thermal destruction and thermal deformation of moulding sands with a new bicomponent ...
متن کاملCationic fluorinated polymer binders for microbial fuel cell cathodes{
Fluorinated quaternary ammonium-containing polymers were used as catalyst binders in microbial fuel cell (MFC) cathodes. The performance of the cathodes was examined and compared to NAFION and other sulfonated aromatic cathode catalyst binders using linear sweep voltammetry (LSV), impedance spectroscopy, and performance tests in single chamber air-cathode MFCs. The cathodes with quaternary ammo...
متن کاملThe Environmental Performance and Cost of Innovative Technologies for Ductile Iron Foundry Production
The authors and collaborators have devised innovative technologies that decrease foundry costs, pollution, materials use, and energy. These include: (a) applying advanced oxidation to green sand and baghouse dust to diminish clay, coal, sand, volatile organic compounds (VOCs), and costs; (b) replacing phenolic urethane core binders with collagen-alkali silicate binders to diminish VOCs; (c) rep...
متن کاملOpen business models: A case study of system-on-a-chip (SoC) design foundry in the integrated circuit (IC) industry
In the global IC industry, business models have evolved into design foundry models and manufacturing foundry service models over the past twenty years. The concept of system-on-a-chip (SoC) refers to integrating all components of a computer or other electronic system in a single integrated circuit (IC). Due to the increasing complexities of SoC devices, it is impossible for one IC design house ...
متن کامل