Synthesis and characterization of electroactive and biodegradable ABA block copolymer of polylactide and aniline pentamer.

نویسندگان

  • Lihong Huang
  • Jun Hu
  • Le Lang
  • Xin Wang
  • Peibiao Zhang
  • Xiabin Jing
  • Xianhong Wang
  • Xuesi Chen
  • Peter I Lelkes
  • Alan G Macdiarmid
  • Yen Wei
چکیده

A triblock copolymer PLA-b-AP-b-PLA (PAP) of polylactide (PLA) and aniline pentamer (AP) with the unique properties of being both electroactive and biodegradable is synthesized by coupling an electroactive carboxyl-capped AP with two biodegradable bi-hydroxyl-capped PLAs via a condensation reaction. Three different molecule weight PAP copolymers are prepared. The PAP copolymers exhibit excellent electroactivity similar to the AP and polyaniline, which may stimulate cell proliferation and differentiation. The electrical conductivity of the PAP2 copolymer film ( approximately 5x10(-6)S/cm) is in the semiconducting region. Transmission electron microscopic results suggest that there is microphase separation of the two block segments in the copolymer, which might contribute to the observed conductivity. The biodegradation and biocompatibility experiments in vitro prove the copolymer is biodegradable and biocompatible. Moreover, these new block copolymer shows good solubility in common organic solvents, leading to the system with excellent processibility. These biodegradable PAP copolymers with electroactive function thus possess the properties that would be potentially used as scaffold materials for neuronal or cardiovascular tissue engineering.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis of biodegradable and electroactive multiblock polylactide and aniline pentamer copolymer for tissue engineering applications.

To obtain one biodegradable and electroactive polymer as the scaffold for tissue engineering, the multiblock copolymer PLAAP was designed and synthesized with the condensation polymerization of hydroxyl-capped poly( l-lactide) (PLA) and carboxyl-capped aniline pentamer (AP). The PLAAP copolymer exhibited excellent electroactivity, solubility, and biodegradability. At the same time, as one scaff...

متن کامل

Investigation of the Properties of Polyurethane Elastomer Based on Synthesis and Characterization of PTHF-GAP-PTHF Triblock Copolymer

Binder has a key role in the performance of composite propellants. The binders are classified into two neutral and high-energy categories. GAP is one of the most important energetic binders, but it has poor mechanical and thermal properties. The goal of this investigation is to improve the properties of GAP by copolymerizing it with polytetrahydrofuran. New energy triblock copolymer was synthes...

متن کامل

Living cationic sequential block copolymerization: synthesis and characterization of poly(4-(2-hydroxyethyl)styrene-b-isobutylene-b-4-(2-hydroxyethyl)styrene) triblock copolymers

INTRODUCTION With the development of living cationic polymerization of isobutylene (IB)1 and styrenic monomers,2–5 the synthesis of ABA triblock copolymer thermoplastic elastomers (TPEs) with polyisobutylene (PIB) as rubbery middle segments and styrenic polymers as plastic outer segments became possible. TPEs with PIB rubbery segments inherently exhibit superior oxidative, chemical and thermal ...

متن کامل

Synthesis and Evaluation of Chitosan -Polyaniline Copolymer in Presence of Ammonium Persulfate as Initiator

Chemical grafting of Polyaniline (PAni) and chitosan (CS) as has been carried out with formaldehyde as grafting agent and ammonium persulfate as an initiator. For this reason aniline monomers were copolymerized with chitosan and were chemically polymerized. The synthesized copolymer was Characterized using Fourier transform infrared spectroscopy (FTIR), UV-Visible, scanning electron microscopy ...

متن کامل

Synthesis and characterization of functionalized single - walled carbon nanotube/ chitosan/polyaniline nanocomposite

In this work the synthesis of polyaniline/chitosan/functionalized single- walled carbon nanotube nanocomposite is carried out. For this purpose single -walled carbon nanotubes were reacted with thionyl chloride to change the hydroxyl to acyl chloride groups for improving the react ability. In other step, aniline monomers and chitosan were polymerized in the presence of Iron (III) chloride to sy...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Biomaterials

دوره 28 10  شماره 

صفحات  -

تاریخ انتشار 2007