Behavior of Plain Concrete of a High Water-Cement Ratio after Freeze-Thaw Cycles
نویسندگان
چکیده
An experimental study of plain concrete specimens of water-cement ratio 0.55, subjected to 0, 15, 25, 40, 50 and 75 cycles of freeze-thaw was completed. The dynamic modulus of elasticity (DME), weight loss, compressive strength, tensile strength, flexural strength, cleavage strength and stress-strain relationships of plain concrete specimens suffering from freeze-thaw cycles were measured. The experimental results showed that the strength decreased as the freeze-thaw cycles were repeated. A concise mathematic formula between DME, weight loss, mechanical properties and number of freeze-thaw cycles was also established. The influences of freeze-thaw cycles on the DME, weight loss and mechanical properties were analyzed. The experimental results serve as a reference for the maintenance, design and life prediction of dams, hydraulic structures, offshore structures, concrete roads and bridges in cold regions.
منابع مشابه
The Effects of Concrete Pavement Mix Design Parameters on Durability under Freeze and Thaw Condition
This paper is based on an experimental research that examined the effects of concrete`s major parameters on durability of concrete pavements and curbs under freezing and thawing cycles. These parameters include concrete mix design parameters such as water-cement ratio, fine aggregate percentage and using air entraining admixture and simulating real freeze-thaw cycles that infrastructures underg...
متن کاملAn Investigation of Coarse Aggregate, Water-Cement Ratio, and Silika Fume on Frost Resistance of HS Concrete
It is well known that the characteristics of concrete components greatly affect the durability of high strength/high performance (HS/HP) concrete against frost action. Undoubtedly, precise recognition of this relationship leads to appropriate selection of the type and proportions of concrete components in any particular project. In the current study, the aim is to investigate the possibility ...
متن کاملAn Investigation of Coarse Aggregate, Water-Cement Ratio, and Silika Fume on Frost Resistance of HS Concrete
It is well known that the characteristics of concrete components greatly affect the durability of high strength/high performance (HS/HP) concrete against frost action. Undoubtedly, precise recognition of this relationship leads 
to appropriate selection of the type and proportions of concrete components in any particular project. In the current study, the aim is to investigate the possibilit...
متن کاملEffects of number of freeze-thaw cycles and freezing temperature on mode I and mode II fracture toughness of cement mortar
Natural and artificial materials including rocks and cement-based materials such as concrete and cement mortar are affected both physically and chemically by various natural factors known as weathering factors. The freeze-thaw process, as a weathering factor, considerably affects the properties of rocks and concrete. Therefore, the effect of the freeze-thaw process on the physical and mechanica...
متن کاملPerformance of Glass Concrete Subjected to Freeze-Thaw Cycling
This article reports the potential use of waste glass powder (GP) to improve the performance of concrete subjected to freeze-thaw (FT) cycling. Three GP contents were utilized in the study: 6%, 12%, and 18% by weight of cement. The other experimental parameters that were investigated in the study include: water to cement ratio (0.4 and 0.6) and aggregate type (limestone and tuff). Concrete pris...
متن کامل