Thermal, dielectrical and mechanical response of α and β-poly(vinilydene fluoride)/Co-MgO nanocomposites
نویسندگان
چکیده
Nanocomposites of the self-forming core-shell Co-MgO nanoparticles, which were of approximately 100 nm in diameter, and poly(vinylidene fluoride) (PVDF) polymer have been prepared. When the polymer is crystallized in the α-phase, the introduction of the nanoparticles leads to nucleation of the γ-phase of PVDF, increasing also the melting temperature of the polymer. With the introduction of the Co-MgO particles, the dielectric constant of the material slightly increases and the storage modulus decreases with respect to the values obtained for the pure polymer.
منابع مشابه
Application of response surface methodology for optimization of fluoride adsorption from aqueous solution using MgO-based nanocomposites
Deleterious effect of high concentration fluoride in water resources on the healthof human. The MgO supported Fe-Co-Mn nanoparticles were produced via coprecipitationmethod and characterized by SEM and FTIR techniques. In the work,the adsorption process optimization was performed by response surface modelingwith the help of Minitab 16 software. The effect of independent ...
متن کاملCured Poly(ethylene-g-maleic anhydride)/Graphene Nanocomposite: Properties and Characterization
Poly(ethylene-g-maleic anhydride) (PEMA)/graphene nanoplatelets (xGn) (PEMA-xGn) composites were prepared by melt dispersion in an internal shear mixer. By adding dicumyl peroxide (DCP), cured poly(ethylene-g-maleic anhydride) C-PEMA was also produced. Different amounts of xGn were introduced into the PEMA in range of 0.5–5 wt. %. The effects of the sequence of feeding additives into the mixer ...
متن کاملPreparation and characterization of polymer-inorganic nanocomposites by in situ melt polycondensation of L-lactic acid and surface-hydroxylated MgO.
Compared with pristine polymers, bionanocomposites derived from biopolymers and inorganic nanoparticles have significantly improved electrical/magnetic properties, mechanical properties, thermal stability, gas barrier properties, and fire retardance. In this study, poly(lactic acid) (PLA) nanocomposites were prepared by in situ melt polycondensation of L-lactic acid with different loading ratio...
متن کاملPET/Mica nanocomposites for food packaging: Crystallization behavior and mechanical properties
Nowadays polymer nanocomposites have introduced as a new class of food packaging materials due to their enhanced mechanical, thermal, and barrier properties. In this study PET nano composites were prepared by melt blending of poly (ethylene terephthalate) pellets and mica nanoparticles. The morphology of PET/mica nanocomposites was characterized by X-ray diffraction and transmission electron mi...
متن کاملRestricted dynamics in oriented semicrystalline polymers: poly(vinilydene fluoride).
The effect of confinement by crystals on the α relaxation, observed by dielectric broadband spectroscopy, in isotropic as well as in oriented semicrystalline poly(vinilydene fluoride), is analyzed on the basis of a new thermodynamic model. In both samples, it has been found that the average free-energy barrier, ΔF, for conformational rearrangements is of the same order of the dispersion barrier...
متن کامل