Preparation and thermal conductivity of CuO nanofluid via a wet chemical method
نویسندگان
چکیده
In this article, a wet chemical method was developed to prepare stable CuO nanofluids. The influences of synthesis parameters, such as kinds and amounts of copper salts, reaction time, were studied. The thermal conductivities of CuO nanofluids were also investigated. The results showed that different copper salts resulted in different particle morphology. The concentration of copper acetate and reaction time affected the size and shape of clusters of primary nanoparticles. Nanofluids with different microstructures could be obtained by changing the synthesis parameters. The thermal conductivities of CuO nanofluids increased with the increase of particle loading.
منابع مشابه
Improvement of Thermal Conductivity Properties of Drilling Fluid by CuO Nanofluid
In a recent decade, application of nanofluid as a candidate for heat transfer medium has gaining an increasing attention due to its unique advantages. In the light of its unique advantages, it has been utilized in different industries such as oil and gas industries. In this work aims at improving thermal conductivity of the water-based drilling fluid by using the CuO nanofluid additive. CuO nan...
متن کاملPreparation of CuO/Water Nanofluids Using Polyvinylpyrolidone and a Survey on Its Stability and Thermal Conductivity
In this article CuO/water nanofluid was synthesized by using polyvinylpyrolidone (PVP) as the dispersant. Thenanofluid stability period and the heat transfer enhancement were determinedby measuring the thermal conductivities. To study the nano-fluid stability, zeta (ζ) potential, and absorbency were measured under different pH values and PVP surfactant concentrations; also thermal conductivity...
متن کاملExperimental investigation on the thermal conductivity of Triethylene Glycol-Water-CuO nanofluids as a desiccant for dehydration process
Liquid desiccants such as glycols are used in dehydration process, among which Triethylene Glycol (TEG) is considered as a common choice. The addition of nanoparticles to TEG as the base fluid is one of the prevalent method to improve thermal properties of TEG. In this study, an experimental investigation was performed on thermal conductivity of TEG-based nanofluids with 20 and 40 nm diameter c...
متن کاملPreparation of MCM-41 nanofluid and an investigation of Brownian movement of the nanoparticles on the nanofluid conductivity
In this investigation the silicate nano structure of MCM-41 has been used for the production of nanofluid. The particles have negligible heat conductivity and therefore by their dispersion in a base fluid like water, it is possible to study the increase of heat conductivity due to the Brownian motion effects. In this work a suitable apparatus for the measurement of heat conductivity has been bu...
متن کاملEnhancements of thermal conductivities with Cu, CuO, and carbon nanotube nanofluids and application of MWNT/water nanofluid on a water chiller system
In this study, enhancements of thermal conductivities of ethylene glycol, water, and synthetic engine oil in the presence of copper (Cu), copper oxide (CuO), and multi-walled carbon nanotube (MWNT) are investigated using both physical mixing method (two-step method) and chemical reduction method (one-step method). The chemical reduction method is, however, used only for nanofluid containing Cu ...
متن کامل