Gas barrier properties of bio-inspired Laponite-LC polymer hybrid films.

نویسندگان

  • Ulrich Tritschler
  • Igor Zlotnikov
  • Peter Fratzl
  • Helmut Schlaad
  • Simon Grüner
  • Helmut Cölfen
چکیده

Bio-inspired Laponite (clay)-liquid crystal (LC) polymer composite materials with high clay fractions (>80%) and a high level of orientation of the clay platelets, i.e. with structural features similar to the ones found in natural nacre, have been shown to exhibit a promising behavior in the context of reduced oxygen transmission. Key characteristics of these bio-inspired composite materials are their high inorganic content, high level of exfoliation and orientation of the clay platelets, and the use of a LC polymer forming the organic matrix in between the Laponite particles. Each single feature may be beneficial to increase the materials gas barrier property rendering this composite a promising system with advantageous barrier capacities. In this detailed study, Laponite/LC polymer composite coatings with different clay loadings were investigated regarding their oxygen transmission rate. The obtained gas barrier performance was linked to the quality, respective Laponite content and the underlying composite micro- and nanostructure of the coatings. Most efficient oxygen barrier properties were observed for composite coatings with 83% Laponite loading that exhibit a structure similar to sheet-like nacre. Further on, advantageous mechanical properties of these Laponite/LC polymer composites reported previously give rise to a multifunctional composite system.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Preparation and Rheological Property Evaluation of LDPE/ Zinc Oxide Nanocomposite Films for Food Packaging Application

Nowadays, nanoscale innovations in the forms of pathogen detection, active packaging, antimicrobial packaging and barrier formation are poised to elevate food packaging to new heights. Antimicrobial nanocomposite LDPE films containing ZnO nanoparticles at different concentrations (e.g. 1%, 3%, 5%  and 3%  nano-ZnO pulse 10% polyethylene grafted maleic anhydride (PE-g-MA), w/w pure LDPE), were p...

متن کامل

Preparation and Rheological Property Evaluation of LDPE/ Zinc Oxide Nanocomposite Films for Food Packaging Application

Nowadays, nanoscale innovations in the forms of pathogen detection, active packaging, antimicrobial packaging and barrier formation are poised to elevate food packaging to new heights. Antimicrobial nanocomposite LDPE films containing ZnO nanoparticles at different concentrations (e.g. 1%, 3%, 5%  and 3%  nano-ZnO pulse 10% polyethylene grafted maleic anhydride (PE-g-MA), w/w pure LDPE), were p...

متن کامل

Electrochromic properties of self-organized multifunctional V2O5–polymer hybrid films

Bio-inspired V2O5–polymer hybrid films were prepared following a one-step self-organization procedure based on liquid crystal formation of organic and inorganic components. These materials were previously reported to exhibit advantageous mechanical properties, comparable to biomaterials, such as human bone and dentin. Here, we show that these hybrid films prepared via a fast and simple synthesi...

متن کامل

Graphene oxide and laponite composite films with high oxygen-barrier properties.

The design and fabrication of oxygen barrier films is important for both fundamental and industrial applications. We prepared three different thin films composed of graphene oxide (GO) and laponite (LN), a typical low cost inorganic clay, with the GO/LN volume ratios of 1.9/0.1, 1.7/0.3 and 1.5/0.5 together with a double layer film of the GO and LN. We found that the films with GO/LN = 1.9/0.1 ...

متن کامل

Oxygen-barrier films based on low-density polyethylene/ ethylene vinyl alcohol/ polyethylene-grafted maleic anhydride compatibilizer

In this research, high oxygen-barrier films were organized based on low-density polyethylene (LDPE)/ ethylene vinyl alcohol (EVOH)/ polyethylene-grafted maleic anhydride (LDPE-g-MA) compatibilizer. The effects of 10–30 wt. % EVOH and 0–10 wt. % LDPE-g-MA loadings on the properties of final films were evaluated. The morphology of specimens was observed by using scanning electron microscopy (SEM)...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:
  • Bioinspiration & biomimetics

دوره 11 3  شماره 

صفحات  -

تاریخ انتشار 2016