Effect of Lithium-ion Intercalation on the Tensileproperties of Carbon Fibres for Energy Storagecomposites
نویسندگان
چکیده
Carbon fibres can be used as structural electrodes because they have a high tensile properties-to-weight ratio and a graphitic structure which enables lithium-ion intercalation. Carbon fibre specimens were used as electrodes in laboratory cells. It was found that the fibre undergoes an ultimate tensile strength drop and an axial expansion which depend on the measured capacity. The results suggest that a tensile strain develops in the carbon fibre which is pre-stressed in tension and that this pre-stress correlates with the amount of lithiumions intercalated.
منابع مشابه
Electrode Materials for Lithium Ion Batteries: A Review
Electrochemical energy storage systems are categorized into different types, according to their mechanisms, including capacitors, supercapacitors, batteries and fuel cells. All battery systems include some main components: anode, cathode, an aqueous/non-aqueous electrolyte and a membrane that separates anode and cathode while being permeable to ions. Being one of the key parts of any new electr...
متن کاملAn Effective Nitrogen Doping Technique for Improving the Performance of Lithium Ion Batteries with CNT Based Electrodes
Lithium ion batteries are among the most used rechargeable batteries in the world. Carbon nanostructures including carbon nanotubes (CNTs) are considered as important electrode materials for this kind of batteries. Therefore improving the performance of these carbon based electrodes in Lithium ion batteries is an important issue and attracts much attention in the battery community. In this manu...
متن کاملNanoporous Ag-CNTs foamed electrode for lithium intercalation
Intercalation of lithium into Ag-CNTs sample is reported here. We have used a nano-porous silver foam as a frame for deposition of the CNTs inside the pores by electrophoresis deposition (EPD) technique. By using chronopotentiometry method, we have noticed that the Li storage capacity of the prepared Ag-CNTs electrode was improved noticeably in comparison with literature. ...
متن کاملEFFECT OF END GROUPS AND CHAIN LENGTH ON EXTRACTION OF LITHIUM ION BY A SERIES OF NON-CYCLIC IONOPHORES
A series of non-cyclic polyethers with different end groups and chain length were used for the extraction of lithium salt from aqueous into various organic phases viz. Chloroform, Carbon tetrachloride, 1,2-dichloroethane, to study the influence of structural variations within the extractant molecule upon the extraction selectivity and efficiency. The ionophores used were viz. DEG (I), DEGDME (I...
متن کاملElectrochemical Characterization of Low-Cost Lithium-Iron Orthosilicate Samples as Cathode Materials of Lithium-Ion Battery
Lithium-iron-orthosilicate is one of the most promising cathode materials for Li-ion batteries due to its safety, environmental brightness and potentially low cost. In order to produce a low cost cathode material, Li2FeSiO4/C samples are synthesized via sol-gel (SG; one sample) and solid state (SS; two samples with different carbon content), starting from Fe (III) in the raw materials (lo...
متن کامل