Structural investigation on GexSb10Se90−x glasses using x-ray photoelectron spectra
نویسندگان
چکیده
منابع مشابه
Structural Investigation, Physical and Optical Properties of Mixed Alkali Bismuth Borate Glasses
Lead free, eco-friendly bismuth borate glasses doped with alkali oxides of composition xLi2O+(30-x)Na2O+55B2O3+15Bi2O3 (x = 5,10,15,20,25) were prepared by melt quenching technique. Amorphous nature of glasses was confirmed by X-ray diffraction. Density measurements were carried out at room temperature by standard principle of Archimedes with Xylene as an immersion liquid. The non-linear ...
متن کاملStructural and magnetic investigations of Fe2O3–TeO2 glasses
A series of tellurite glasses containing Fe2O3 with the nominal composition x(Fe2O3)–(1 x)(TeO2), where x = 0.05, 0.10, 0.15, and 0.20, have been synthesized and investigated using X-ray photoelectron spectroscopy (XPS) and magnetization techniques. The Te3d core level spectra for all glass samples show symmetrical peaks at essentially the same binding energies as measured for TeO2 indicating t...
متن کاملOptical and Thermal Properties of Mixed Alkali Phosphate Based Glasses
Glassy samples with a composition of 40P2O5–30V2O5–(30-x)Li2O– xK2O, 0<x<30 (mol %) were prepared by the conventional melt quenching technique in two forms of bulk and blown film. X-ray diffraction patterns corroborated the amorphous feature of the samples. Density of samples was investigated by using Archimedes principle. Based on absorption and reflection spectra, indirect a...
متن کاملStructural and magnetic properties of sodium iron germanate glasses
A series of sodium iron germanate glasses, with general composition 0.3Na2O±xFe2O3±(0.7 ) x)GeO2 (06 x6 0:15), has been prepared by conventional melting and casting. The chemical states of the various elemental components have been investigated by X-ray photoelectron spectroscopy (XPS) from fracture surfaces produced in situ. The analysis of the Fe 3p core level spectra of the glasses which con...
متن کاملEffect of Cu Content on TiN-Cu Nanocomposite Film Properties: Structural and Hardness Studies
Titanium nitride-Copper (TiN-Cu) nanocomposite films were deposited onto stainless steel substrate using hollow cathode discharge ion plating technique. The influence of Cu content in the range of 2-7 at.% on the microstructure, morphology and mechanical properties of deposited films were investigated. Structural properties of the films were studied by X-ray diffraction pattern. Topography of t...
متن کامل