Broadband terahertz conductivity and optical transmission of indium-tin-oxide (ITO) nanomaterials.
نویسندگان
چکیده
Indium-tin-oxide (ITO) nanorods (NRs) and nanowhiskers (NWhs) were fabricated by an electron-beam glancing-angle deposition (GLAD) system. These nanomaterials are of interests as transparent conducting electrodes in various devices. Two terahertz (THz) time-domain spectrometers (TDS) with combined spectral coverage from 0.15 to 9.00 THz were used. These allow accurate determination of the optical and electrical properties of such ITO nanomaterials in the frequency range from 0.20 to 4.00 THz. Together with Fourier transform infrared spectroscopic (FTIR) measurements, we found that the THz and far-infrared transmittance of these nanomaterials can be as high as 70% up to 15 THz, as opposed to about 9% for sputtered ITO thin films. The complex conductivities of ITO NRs, NWhs as well films are well fitted by the Drude-Smith model. Taking into account that the volume filling factors of both type of nanomaterials are nearly same, mobilities, and DC conductivities of ITO NWhs are higher than those of NRs due to less severe carrier localization effects in the former. On the other hand, mobilities of sputtered ITO thin films are poorer than ITO nanomaterials because of larger concentration of dopant ions in films, which causes stronger carrier scattering. We note further that consideration of the extreme values of Re{σ} and Im{σ} as well the inflection points, which are functions of the carrier scattering time (τ) and the expectation value of cosine of the scattering angle (γ), provide additional criteria for accessing the accuracy of the extraction of electrical parameters of non-Drude-like materials using THz-TDS. Our studies so far indicate ITO NWhs with heights of ~1000 nm show outstanding transmittance and good electrical characteristics for applications such as transparent conducting electrodes of THz Devices.
منابع مشابه
Synthesis and Morphology Study of Nano-Indium Tin Oxide (ITO) Grains
In this paper, indium tin oxide (ITO) nanoparticles has been prepared by chemical methods under given conditions with solution of indium chloride (InCl3·4H2O), tin chloride (SnCl4·5H2O) in ammonia solution. The samples were characterized by X-ray Diffraction (XRD) and scanning electron microscopy (SEM) analyses after heat treatments. The SEM results showed that, the size of the ITO particles pr...
متن کاملEnhanced Physical Properties Of Indium Tin Oxide Films Grown on Zinc Oxide-Coated Substrates
Structural, electrical and optical properties of indium tin oxide or ITO (In2O3:SnO2) thin films on different substrates are investigated. A 100-nm-thick pre-deposited zinc oxide (ZnO) buffer layer is utilized to simultaneously improve the electrical and optical properties of ITO films. High purity ZnO and ITO layers are deposited with a radio frequency sputtering in argon ambient with plasma p...
متن کاملSynthesis and Morphology Study of Nano-Indium Tin Oxide (ITO) Grains
In this paper, indium tin oxide (ITO) nanoparticles has been prepared by chemical methods under given conditions with solution of indium chloride (InCl3·4H2O), tin chloride (SnCl4·5H2O) in ammonia solution. The samples were characterized by X-ray Diffraction (XRD) and scanning electron microscopy (SEM) analyses after heat treatments. The SEM results showed that, the size of the ITO particles pr...
متن کاملA new architecture for transparent electrodes: relieving the trade-off between electrical conductivity and optical transmittance.
Transparent conducting electrodes with the combination of high optical transmission and good electrical conductivity are essential and desirable in solar energy harvesting and electric lighting devices including organic solar cells and light-emitting diodes (LEDs) as well as in their inorganic counterparts. Currently, indium tin oxide (ITO) coated glass is most often used because ITO has relati...
متن کاملBroadband light absorption enhancement in polymer photovoltaics using metal nanowall gratings as transparent electrodes.
The authors investigate light absorption in organic solar cells in which indium tin oxide (ITO) is replaced by a new metallic architecture (grating) as a transparent electrode. Different from typical metal nanowire gratings, our gratings consist of metal nanowalls with nanoscale footprint and (sub)microscale height [Adv. Mater. 23, 2469 (2011)], thus ensuring high optical transmittance and elec...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Optics express
دوره 21 14 شماره
صفحات -
تاریخ انتشار 2013