Graphite / Titanium Dioxide Composite

نویسندگان

  • Jaroslav LANG
  • Vlastimil MATĚJKA
چکیده

Nanosized titanium dioxide (TiO2) in its anatase form is the most frequently studied and as well as used photocatalyst. There are several syntheses procedures which enable to achieve photocatalytic TiO2. The solgel method utilizing titanium alkoxides is used most often. Alternative precursors such as titanium tetrachloride and titanyl sulphate are also frequently employed. Nowadays the environmental aspects connected to application of nanoparticles are widely discussed. As a possible solution how to avoid potential negative impact of nanoparticles is their fixation on the surface of suitable substrate. In this work we focused on the preparation of graphite/TiO2 composite (with 10 and 50 wt.% of TiO2, respectively) using non-alkoxide precursor. The phase composition of prepared samples was studied using X-ray diffraction method, specific surface area of the samples was evaluated using BET method. Photocatalytic activity of prepared composites was determined by the means of UV induced discoloration of aqueous suspension of the composite and acid orange 7.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Synthesis of TiO2 Nanoparticle and its Application to Graphite Composite Electrode for Hydroxylamine Oxidation

In this work, sol-gel method was used tosynthesize titanium dioxide nanoparticles (TiO2). The TiO2nanoparticles was characterized by Scanning Electron Microscopy (SEM), x-ray diffraction (XRD) and BET technique.The TiO2 and coumarin derivative (7-(1,3-dithiolan-2-yl)-9, 10-dihydroxy-6H-benzofuro [3,2-c] chromen-6-on) were incorporated in a graphite composite ele...

متن کامل

Photocatalytic Composite Materials Based on Graphene and Titanium Oxide Prepared by Different Methods

Titanium(IV) oxide graphene [1] or graphene oxide nano composite [2] were prepared by one-pot thermal hydrolysis of suspension graphene or graphene oxide nanosheets and titanium oxide in three different forms as a starting materials. Graphene nanosheets were produced in a large quantity from natural graphite using a high intensity cavitation field in a pressurized ultrasonic reactor [3]. The gr...

متن کامل

Production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying

In this research, the production of Fe-TiN and Fe-Ti(N,C) composite powders by mechanical alloying was investigated and evaluated. Ferrotitanium (containing 70%Ti), titanium and graphite were used as the raw materials. Initial mixtures were milled in different time durations under the pure nitrogen atmosphere with the pressure of 5atm. The results showed that when N2 pressure is 5 at...

متن کامل

Inorganic-Filler Chemical Vapor Deposition: A New Approach To Grow Nanoporous Thin Films

A new method for the growth of nanoporous thin films is described. The process is targeted to the formation of titanium dioxide (TiO2) through a low-temperature inorganic-filler chemical vapor deposition (CVD) process. The growth technique employs gas-phase reaction of an alkali metal (Na) and a metal halide (TiCl4) and subsequent thin film growth within a low-pressure coflow diffusion reactor....

متن کامل

IN-SITU FABRICATION PROCESS OF AL- TIC COMPOSITE BY SLAG

The new in situ method for AI-TiC composite fabrication has been carried out. In this method, fabrication of AI-TiC composite by simultaneous introduction of titanium oxide and carbon into aluminum melt was investigated.. Under the process conditions, titanium and carbon reaction results in titanium carbide whiskers. The salt containing keriolite (Na3AIF6), titanium oxide (TiO2) and graphite us...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2013