High-Yield Z-Pinch Thermonuclear Neutron Source

نویسندگان

  • A. L. Velikovich
  • R. W. Clark
  • J. Davis
  • J. L. Giuliani
  • Y. K. Chong
  • C. A. Coverdale
  • D. Flicker
چکیده

Introduction: Neutron beams are useful for many applications, from noninvasive imaging and characterization of materials to producing medical isotopes and detecting hidden explosive devices. Some applications require high-energy neutrons created in fusion nuclear reactions between deuterium (D) and tritium (T). To achieve thermal fusion, deuterium or DT plasma must be heated to about 10 8 K, which is a challenging task. One of the pathways to controlled thermonuclear fusion is inertial confinement fusion (ICF). High-energy ICF lasers, such as OMEGA at the University of Rochester and the National Ignition Facility (NIF) at Lawrence Livermore National Laboratory, as well as ICF pulse power facilities, such as the Z accelerator at Sandia National Laboratories, compress and heat deuterium or DT-filled capsules by strong laser or X-ray radiation. The highest thermonuclear DD neutron yield of the pre-NIF era is about 3 × 10 11 , obtained by direct capsule illumination with laser beams on OMEGA and by X-ray compression on Z. In the future, NIF will deliver ~180 kJ of X-ray energy to the capsule. DT neutron yield corresponding to " breakeven " (the same energy input as released in a DT reaction) is 6 × 10 16. Neutron yields above 6 × 10 16 can only be produced when the fusion energy release exceeds the input, indicating ignition and fusion energy gain. On the other hand, a DD plasma at the same temperature and density would produce a fusion neutron yield about two orders of magnitude less due to lower reaction cross section, that is, about 6 × 10 14. Deuterium fusion neutron yields of this magnitude could only be expected from ignition-scale ICF facilities, only one of which, NIF, has been built so far. 13 , exceeding the previous ICF record by two orders of magnitude, has recently been obtained on Z without a capsule implosion. A deuterium gas column was imploded in cylindrical geometry by a 15 MA, 100-ns-long current pulse, as illustrated by Figs. 1(a) and (b). The most powerful, fast, multi-MA current driver in the world, shown in Fig. 1(c), is much smaller and simpler to operate than ignition-class lasers. Non-thermonuclear DD fusion neutrons have been produced in Z-pinch plasmas at pinch currents up to about 2 MA for many years. They were generated by relatively small quantities of " beam " deuterium ions accelerated in the strong electric fields accompanying the development of instabilities in the pinch. …

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Pulse Power Compression by Cutting a Dense Z-Pinch with a Laser Beam

A thin cut made through a z-pinch by an intense laser beam can become a magnetically insulated diode crossed by an intense ion beam. For larger cuts, the gap is crossed by an intense relativistic electron beam, stopped by magnetic bremsstrahlung resulting in a pointlike intense x-ray source. In either case, the impedance of the pinch discharge is increased, with the power delivered rising in th...

متن کامل

Propagating Thermonuclear Burn by Laser Ignition of a Dense Z-Pinch

A linear pinch discharge above the Pease-Braginskii current and stabilized by axial shear flow can radiatively collapse to high densities. A thermonuclear detonation wave can then be launched from one end of the discharge channel by ignition with a powerful laser pulse. Axial shear flow stabilization may be realized by injecting a fast moving jet along the pinch discharge channel, possibly in c...

متن کامل

Designing an Am-Be miniature neutron source

Background: Miniature neutron sources with high neutron flux have abundant applications in medicine, industry and researches. The most important general characteristic of miniature neutron sources is their diameter which is 3mm in average. In this research, we have surveyed and designed an Am-Be miniature neutron source fabrication. Materials and Methods: This investigation resulted in creation...

متن کامل

Estimation of neutron effective dose from DD and DT neutron generators and the design of appropriate shield for standing user

Neutron Generators (NG) are used as a neutron source for different applications. During recent years, major efforts are underway to develop a high yield compact NG. In this way, radiation protection aspects need to be considered during the operation of these high yield NGs. In this paper the neutron effective dose of a NG operator has been calculated using MCNPX Monte Carlo code. The results sh...

متن کامل

Target design for high fusion yield with the double Z-pinch-driven hohlrauma..

A key demonstration on the path to inertial fusion energy is the achievement of high fusion yield !hundreds of MJ" and high target gain. Toward this goal, an indirect-drive high-yield inertial confinement fusion !ICF" target involving two Z-pinch x-ray sources heating a central secondary hohlraum is described by Hammer et al. #Phys. Plasmas 6, 2129 !1999"$. In subsequent research at Sandia Nati...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2011