PFO-DBT:MEH-PPV:PC71BM Ternary Blend Assisted Platform as a Photodetector
نویسندگان
چکیده
We present a ternary blend-based bulk heterojunction ITO/PEDOT:PSS/PFO-DBT: MEH-PPV:PC71BM/LiF/Al photodetector. Enhanced optical absorption range of the active film has been achieved by blending two donor components viz. poly[2,7-(9,9-di-octyl-fluorene)-alt-4,7-bis(thiophen-2-yl)benzo-2,1,3-thiadiazole] (PFO-DBT) and poly(2-methoxy-5(2'-ethylhexyloxy) phenylenevinylene (MEH-PPV) along with an acceptor component, i.e., (6,6)-phenyl-C71 hexnoic acid methyl ester. The dependency of the generation rate of free charge carriers in the organic photodetector (OPD) on varied incident optical power density was investigated as a function of different reverse biasing voltages. The photocurrent showed significant enhancement as the intensity of light impinging on active area of OPD is increased. The ratio of Ilight to Idark of fabricated device at -3 V was ~3.5 × 10(4). The dynamic behaviour of the OPD under on/off switching irradiation revealed that sensor exhibits quick response and recovery time of ∼800 ms and 500 ms, respectively. Besides reliability and repeatability in the photoresponse characteristics, the cost-effective and eco-friendly fabrication is the added benefit of the fabricated OPD.
منابع مشابه
High-performance ternary blend polymer solar cells involving both energy transfer and hole relay processes
The integration of multiple materials with complementary absorptions into a single junction device is regarded as an efficient way to enhance the power conversion efficiency (PCE) of organic solar cells (OSCs). However, because of increased complexity with one more component, only limited high-performance ternary systems have been demonstrated previously. Here we report an efficient ternary ble...
متن کاملEnhanced Optoelectronic Properties of PFO/Fluorol 7GA Hybrid Light Emitting Diodes via Additions of TiO2 Nanoparticles
The effect of TiO2 nanoparticle (NP) content on the improvement of poly(9,9′-di-noctylfluorenyl-2,7-diyl) (PFO)/Fluorol 7GA organic light emitting diode (OLED) performance is demonstrated here. The PFO/Fluorol 7GA blend with specific ratios of TiO2 NPs was prepared via a solution blending method before being spin-coated onto an indium tin oxide (ITO) substrate to act as an emissive layer in OLE...
متن کاملMelt free-radical grafting of glycidyl methacrylate (GMA) onto EPDM backbone and effect of EPDM-g-GMA on the morphology and mechanical properties of PS/EPDM/PA6 ternary blends
Melt free-radical grafting reactions between ethylene-propylene-dieneterpolymer (EPDM) and glycidyl methacrylate (GMA) were investigated in a batch mixer (170°C, 60rpm). Effect of dicumylperoxide (DCP) initiator and GMA functionalizing monomer concentrations was studied on the grafted EPDM characteristics. Titration results indicated an increase in the graft degree (GD) and gel content (GC) val...
متن کاملAn Intimate Polycarbonate/Poly(methyl methacrylate)/ Poly(vinyl acetate) Ternary Blend via Coalescence from Their Common Inclusion Compound with -Cyclodextrin
In this study, we successfully report an intimate ternary blend system of polycarbonate (PC)/poly(methyl methacrylate) (PMMA)/poly(vinyl acetate) (PVAc) obtained by the simultaneous coalescence of the three guest polymers from their common -cyclodextrin ( -CD) inclusion compound (IC). The thermal transitions and the homogeneity of the coalesced ternary blend were studied by differential scannin...
متن کاملVisible Light Communication System Using an Organic Bulk Heterojunction Photodetector
A visible light communication (VLC) system using an organic bulk heterojunction photodetector (OPD) is presented. The system has been successfully proven indoors with an audio signal. The emitter consists of three commercial high-power white LEDs connected in parallel. The receiver is based on an organic photodetector having as active layer a blend of poly(3-hexylthiophene) (P3HT) and phenyl C6...
متن کامل