Development of a modular directional and spectral neutron detection system using solid-state detectors

نویسندگان

  • A. Weltz
  • B. Torres
  • L. McElwain
  • R. Dahal
  • J. Huang
  • I. Bhat
  • J. Lu
  • Y. Danon
چکیده

A detection system using room-temperature, microstructured solid-state thermal neutron detectors with very low leakage current has been developed at Rensselaer Polytechnic Institute (RPI) with the ability to provide positional and spectral information about an unknown neutron source. The Directional and Spectral Neutron Detection System (DSNDS) utilizes a set of small-but-scalable, zero-bias solid-state thermal neutron detectors which have demonstrated high thermal neutron efficiency and adequate gamma insensitivity. The DSNDS can gather spectral information about an unknown neutron source with a relatively small number of detectors, simplifying the detector electronics and minimizing cost; however, the DSNDS is modular in design, providing the capability to increase the detection efficiency and angular resolution. The system used in this paper was comprised of a stack of five high-density polyethylene (HDPE) disks with a thickness of 5 cm and a diameter of 30 cm, the middle disk containing 16 detectors positioned as one internal (moderated) and one external (unmoderated) ring of solid-state neutron detectors. These two detector rings provide the ability to determine the directionality of a neutron source. The system gathers spectral information about a neutron source in two ways: by measuring the relative responses of the internal ring of detectors as well as measuring the ratio of the internal-to-external detector responses. Experiments were performed with variable neutron spectra: a Cf spontaneous fission neutron source which was HDPE moderated, HDPE reflected, lead (Pb) shielded, and bare in order to benchmark the system for spectral sensitivity. Simulations were performed in order to characterize the neutron spectra corresponding to each of the source configurations and showed agreement with experimental measurements. The DSNDS demonstrates the ability to determine the relative angle of the source and the hardness of the neutron spectrum. By using the single HDPE disk with two detector rings and stacking four moderator disks, the intrinsic efficiency for Cf spectrum of such detector is about 0.4%70.04%. & 2015 Elsevier B.V. All rights reserved.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Towards high efficiency solid-state thermal and fast neutron detectors

Variety of applications of fast neutron detection utilize thermal neutron detectors and moderators. Examples include homeland security applications such as portal monitors and nuclear safeguards which employ passive systems for detection of fissile materials. These applications mostly rely on gas filled detectors such as 3He, BF3 or plastic scintillators and require high voltage for operation. ...

متن کامل

Large Area Zero Bias Solid-state Neutron Detectors

Solid-state neutron detectors utilize latest advancement in semiconductors for development of efficient and economical neutron detectors. The recent shortage and price increase of He-3 resulted in more incentive to reach maturity of this technology and enable replacement of gas based neutron detectors. Solid state neutron detectors provide important advantages over current neutron detectors suc...

متن کامل

Optimizing diode thickness for thin-film solid state thermal neutron detectors

Related Articles Ultrafast semiconductor x-ray detector Appl. Phys. Lett. 101, 031107 (2012) X-ray bang-time and fusion reaction history at picosecond resolution using RadOptic detection Rev. Sci. Instrum. 83, 10D307 (2012) Self-powered micro-structured solid state neutron detector with very low leakage current and high efficiency Appl. Phys. Lett. 100, 243507 (2012) Position and energy-resolve...

متن کامل

Comparative modeling of performance limits of solid state neutron detectors based on planar B-rich capture layers

Solid-state neutron detectors based only on boron-rich semiconductors are of interest for their potential to provide the highest thermal neutron detection efficiencies of any solid-state neutron detectors. A simple physical model, recently shown to generate thermal neutron capture product spectra that agree quantitatively with full-physics GEANT4 simulation, is used to compare the capture produ...

متن کامل

Scalable large-area solid-state neutron detector with continuous p–n junction and extremely low leakage current

We report on the fabrication and characterization of solid-state thermal neutron detectors with detection areas up to 16 cm that require only a single preamplifier for data acquisition. These detectors consist of a honeycomb-like micro-structured Si diode with boron-10 filled deep holes. A continuous p–n junction formed over the entire surface of the microstructure helps to achieve a low leakag...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2015