Effect of Injection Pressure and Size of Nozzle Throat of a Cavitating Jet on Cavitation Peening
نویسندگان
چکیده
Abstract Cavitation peening is a peening method using impacts at cavitation bubble collapses generated by a cavitating jet. In order to introduce compressive residual stress avoiding damage on the peened surface, residual stress of stainless steel was investigated at various cavitating conditions. It was revealed that the large cavitating jet at low injection pressure such as 30 MPa can introduce larger compressive residual stress into deeper region comparing of small cavitating jet at high injection pressure such as 300 MPa.
منابع مشابه
Influence of nozzle geometry and injection conditions on the cavitation flow inside a diesel injector
Cavitation and turbulence in a diesel injector nozzle has a great effect on the development and primary breakup of spray. However, the mechanism of the cavitation flow inside the nozzle and its influence on spray characteristics have not been clearly known yet because of the internal nozzle flow complexities. In this paper, a comprehensive numerical simulation is carried out to study the intern...
متن کاملHigh Speed Observation of Periodic Cavity Behavior in a Convergent-Divergent Nozzle for Cavitating Water Jet
Cloud cavitation shows an unsteady periodic tendency under a certain flow condition. In a cavitating water jet flow with cavitation clouds, the cavities or the clouds produce high impact at their collapse. In order to make clear a mechanism of the periodic cavity behavior, we experimentally examine the behavior in a transparent cylindrical convergent-divergent nozzle using a high-speed video ca...
متن کاملPhysical Modelling of Self-Aeration in a Cavitating Sudden PIPE Expansion Flow
Sudden pipe expansions have been known as efficient hydraulic energy dissipaters for a long time. The complex phenomenon of flow separation and velocity discontinuity at the interface of incoming jet and the recirculation flow, results in intensive shear and tensile rupture of the fluid and the associated destructive phenomenon of cavitation. This paper focuses on aeration in sudden pipe expans...
متن کاملInvestigation the effects of injection pressure and compressibility and nozzle entry in diesel injector nozzle’s flow
Investigating nozzle’s orifice flow is challenging both experimentally and theoretically. This paper focuses on simulating flow inside diesel injector nozzle via Ansys fluent v15. Validation is performed with experimental results from Winkhofler et al (2001). Several important parameters such as mass flow rate, velocity profiles and pressure profiles are used for this validation. Results includ...
متن کاملUnraveling the Geometry Dependence of In-Nozzle Cavitation in High-Pressure Injectors
Cavitation is an intricate multiphase phenomenon that interplays with turbulence in fluid flows. It exhibits clear duality in characteristics, being both destructive and beneficial in our daily lives and industrial processes. Despite the multitude of occurrences of this phenomenon, highly dynamic and multiphase cavitating flows have not been fundamentally well understood in guiding the effort t...
متن کامل