Stabilisation of Fe2O3-rich Perovskite Nanophase in Epitaxial Rare-earth Doped BiFeO3 Films

نویسندگان

  • Huairuo Zhang
  • Ian M. Reaney
  • Daniel M. Marincel
  • Susan Trolier-McKinstry
  • Quentin M. Ramasse
  • Ian MacLaren
  • Scott D. Findlay
  • Robert D. Fraleigh
  • Ian M. Ross
  • Shunbo Hu
  • Wei Ren
  • W. Mark Rainforth
چکیده

Researchers have demonstrated that BiFeO3 exhibits ferroelectric hysteresis but none have shown a strong ferromagnetic response in either bulk or thin film without significant structural or compositional modification. When remanent magnetisations are observed in BiFeO3 based thin films, iron oxide second phases are often detected. Using aberration-corrected scanning transmission electron microscopy, atomic resolution electron energy loss spectrum-mapping and quantitative energy dispersive X-ray spectroscopy analysis, we reveal the existence of a new Fe2O3-rich perovskite nanophase, with an approximate formula (Fe0.6Bi0.25Nd0.15)(3+) Fe(3+)O3, formed within epitaxial Ti and Nd doped BiFeO3 perovskite films grown by pulsed laser deposition. The incorporation of Nd and Bi ions on the A-site and coherent growth with the matrix stabilise the Fe2O3-rich perovskite phase and preliminary density functional theory calculations suggest that it should have a ferrimagnetic response. Perovskite-structured Fe2O3 has been reported previously but never conclusively proven when fabricated at high-pressure high-temperature. This work suggests the incorporation of large A-site species may help stabilise perovskite-structured Fe2O3. This finding is therefore significant not only to the thin film but also to the high-pressure community.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Domain Engineering for Enhanced Ferroelectric Properties of Epitaxial (001) BiFeO Thin Films

Adv. Mater. 2009, 21, 817–823 2009 WILEY-VCH Verlag Gm Multiferroic BiFeO3 has attracted great interest due to its promising application tomagnetoelectric devices. In addition, the high remanent polarization and piezoelectric response of BiFeO3 thin films, which are comparable to those of conventional Ti-rich lead zirconia titanate, suggested BiFeO3 as a strong candidate for lead-free nonvolati...

متن کامل

Ultrafast photoinduced mechanical strain in epitaxial BiFeO3 thin films

Related Articles Formation of stress-controlled, highly textured, α-SiC thin films at 950°C J. Appl. Phys. 112, 013535 (2012) Epitaxial strain-induced changes in the cation distribution and resistivity of Fe-doped CoFe2O4 Appl. Phys. Lett. 101, 021907 (2012) Strain-induced effects on the dielectric constant for thin, crystalline rare earth oxides on silicon Appl. Phys. Lett. 100, 232905 (2012) ...

متن کامل

Composition-driven structural phase transitions in rare-earth-doped BiFeO3 ceramics: a review.

Bismuth ferrite suffers from high leakage currents and the presence of a complex incommensurate spin cycloidal magnetic ordering, which has limited its commercial viability and has led researchers to investigate the functionality of doped BiFeO3 ceramics. In particular, the substitution of rare earths onto the Bi(3+) site of the perovskite lattice have been shown to lead to improved functional ...

متن کامل

Control of ferroelectricity and magnetism in multi-ferroic BiFeO3 by epitaxial strain.

Recently, strain engineering has been shown to be a powerful and flexible means of tailoring the properties of ABO3 perovskite thin films. The effect of epitaxial strain on the structure of the perovskite unit cell can induce a host of interesting effects, these arising from either polar cation shifts or rotation of the oxygen octahedra, or both. In the multi-ferroic perovskite bismuth ferrite ...

متن کامل

Synthesis, Structures, and Physical Properties of Yttrium-Doped Strontium Manganese Oxide Films

Cubic strontium manganese oxide is an end-member of the colossal magnetoresistive (CMR) family of manganese-based perovskites, Ln1-xAExMnO3. Because normal synthesis conditions lead to the 4-H hexagonal polymorph, high-pressure conditions are typically used to obtain the cubic perovskite polymorph. In this work, we describe the synthesis and structural/physical characterization of the cubic per...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 5  شماره 

صفحات  -

تاریخ انتشار 2015