Lamb-Wave-Based Tomographic Imaging Techniques for Hole-Edge Corrosion Monitoring in Plate Structures
نویسندگان
چکیده
This study presents a novel monitoring method for hole-edge corrosion damage in plate structures based on Lamb wave tomographic imaging techniques. An experimental procedure with a cross-hole layout using 16 piezoelectric transducers (PZTs) was designed. The A0 mode of the Lamb wave was selected, which is sensitive to thickness-loss damage. The iterative algebraic reconstruction technique (ART) method was used to locate and quantify the corrosion damage at the edge of the hole. Hydrofluoric acid with a concentration of 20% was used to corrode the specimen artificially. To estimate the effectiveness of the proposed method, the real corrosion damage was compared with the predicted corrosion damage based on the tomographic method. The results show that the Lamb-wave-based tomographic method can be used to monitor the hole-edge corrosion damage accurately.
منابع مشابه
Corrosion Detection/quantification on Thin-wall Structures Using Multi- Mode Sensing Combined with Statistical and Time-frequency Analysis
In this paper, we present a multiple mode sensing methodology to detect active corrosion in aluminum structure utilizing the broadband piezoelectric wafer active sensors. This method uses ultrasonic Lamb wave complemented with the electromechanical impedance measurement to detect, quantify, and localize the corrosion progression in plate-like structures. The ultimate objective of this research ...
متن کاملLamb Wave Tomography and Its Application in Pipe Erosion/corrosion Monitoring
number of NDE applications. To excite Lamb waves, Ultrasonic Lamb wave techniques are widely used in a mode conversion of bulk waves or photo acoustic excitation are often used. Both of these approaches suffer from the need for liquid couplant or ablation of materials to reach good signal to noise ratio. In this paper, we propose a novel technique that utilizes point source excitation and detec...
متن کاملSparse Array Tomography System for Corrosion Extent Monitoring
A sparse array guided wave tomography system is investigated for monitoring plate wall thinning status caused by corrosion/erosion. Because of their group velocity dependence on the structure wall thickness of some special modes, ultrasonic guided waves are sensitive to structure wall thinning status. As a low resolution imaging technique, a sparse array system provides many advantages. First, ...
متن کاملUltrasonic Lamb wave tomography
Nondestructive evaluation (NDE) of aerospace structures using traditional methods is a complex, time-consuming process critical to maintaining mission readiness and flight safety. Limited access to corrosion-prone structure and the restricted applicability of available NDE techniques for the detection of hidden corrosion or other damage often compound the challenge. In this paper we discuss our...
متن کاملOn-Line Corrosion Monitoring of Plate Structures Based on Guided Wave Tomography Using Piezoelectric Sensors
Corrosion is a major safety and economic concern to various industries. In this paper, a novel ultrasonic guided wave tomography (GWT) system based on self-designed piezoelectric sensors is presented for on-line corrosion monitoring of large plate-like structures. Accurate thickness reconstruction of corrosion damages is achieved by using the dispersive regimes of selected guided waves and a re...
متن کامل