Growth and Characterization of Iii-v Compound Semiconductor Nanostructures by Metalorganic Chemical Vapor Deposition By
نویسندگان
چکیده
ii ABSTRACT Planar <110> GaAs nanowires and quantum dots grown by atmospheric MOCVD have been introduced to non-standard growth conditions such as incorporating Zn and growing them on free-standing suspended films and on 10° off-cut substrates. Zn doped nanowires exhibited periodic notching along the axis of the wire that is dependent on Zn/Ga gas phase molar ratios. Planar nanowires grown on suspended thin films give insight into the mobility of the seed particle and change in growth direction. Nanowires that were grown on the off-cut sample exhibit anti-parallel growth direction changes. Quantum dots are grown on suspended thin films and show preferential growth at certain temperatures. Envisioned nanowire applications include twin-plane superlattices, axial pn-junctions, nanowire lasers, and the modulation of nanowire growth direction against an impeding barrier and varying substrate conditions. iii To my mother, father, and sister iv TABLE OF CONTENTS
منابع مشابه
A nucleation study of group III-nitride multifunctional nanostructures
A Stranski–Krastanow (SK)-like growth mode is shown for GaN nanostructures on AlN template layers grown by metalorganic chemical vapor deposition on sapphire substrates. A wide temperature range from 800 to 1100 1C and V/III ratios ranging from 4.5 to 3500 were explored to determine the optimal growth conditions. Silicon was used as an anti-surfactant to enhance the nucleation. Further, an acti...
متن کاملMetalorganic Chemical Vapor Deposition For Optoelectronic Devices - Proceedings of the IEEE
The metalorganic chemical vapor deposition (MOCVD) process for electronic and photonic compound semiconductor materials and devices is reviewed. We begin with an introduction to the basic MOCVD chemical reaction process, gas delivery equipment, reaction chambers, and safety. Growth mechanisms, including hydrodynamics, boundary-layer issues, thermal effects, and pyrolysis reactions, are defined,...
متن کاملInGaAs/GaAs 3D architecture formation by strain-induced self-rolling with lithographically defined rectangular stripe arrays
Three-dimensional (3D) compound semiconductor architectures can be formed when strained semiconductor layers are released from the substrate by selective etching. These 3D nanostructures have potential applications in nanoelectronics, nanophotonics and nanomechanics. In this paper, we report on the formation of In0.2Ga0.8As/GaAs 3D structures using lithographically defined micronsize, open-ende...
متن کاملDirect band gap structures on nanometer-scale, micromachined silicon tips
The selective deposition of compound semiconductors on single crystal silicon tip arrays produces optical quality, direct band gap materials on the silicon nanostructures. We demonstrate using the organometallic vapor phase epitaxy of GaInP that the direct band gap semiconductor nucleates selectively on the silicon tips. The structural properties of the tips ~whose radius of curvature is approx...
متن کاملMetalorganic Chemical Vapor Deposition: Examples of the Influence of Precursor Structure on Film Properties
The influence of precursor structure and reactivity on properties of compound semiconductors grown by metalorganic chemical vapor deposition (MOCVD) is discussed and illustrated with examples for growth of GaAs, ZnSe, and A1,Gal-,N. Gas-phase and surface reactions of organometallic arsenic compounds provide understanding of variation in carbon incorporation levels with precursor structure. Surf...
متن کامل