Research on the Trajectory Model for ZY-3
نویسندگان
چکیده
The new generation Chinese high-resolution three-line stereo-mapping satellite Ziyuan 3 (ZY-3) is equipped with three sensors (nadir, backward, and forward views). Its objective is to manufacture the 1 : 50000 topographic map and revise and update the 1 : 25000 topographic map. For the push-broom satellite, the interpolation accuracy of orbit and attitude determines directly the satellite's stereo-mapping accuracy and the position accuracy without ground control point. In this study, a new trajectory model is proposed for ZY-3 in this paper, according to researching and analyzing the orbit and attitude of ZY-3. Using the trajectory data set, the correction and accuracy of the new proposed trajectory are validated and compared with the other models, polynomial model (LPM), piecewise polynomial model (PPM), and Lagrange cubic polynomial model (LCPM). Meanwhile, the differential equation is derivate for the bundle block adjustment. Finally, the correction and practicability of piece-point with weight polynomial model for ZY-3 satellite are validated according to the experiment of geometric correction using the ZY-3 image and orbit and attitude data.
منابع مشابه
Sensor Calibration of Three-line Ccd Scanners on Zy-3
ZY-3 is the first Chinese civilian high-resolution stereo mapping satellite. ZY-3 is equipped with three-line scanners (nadir, backward and forward views with 2.5m and 4.0m resolutions, respectively) and an additional multispectral scanner. In order to improve the mapping and positioning accuracy, sensor in-orbit calibration is a crucial procedure especially for high-resolution mapping-enabled ...
متن کاملTrajectory Tracking of Two-Wheeled Mobile Robots, Using LQR Optimal Control Method, Based On Computational Model of KHEPERA IV
This paper presents a model-based control design for trajectory tracking of two-wheeled mobile robots based on Linear Quadratic Regulator (LQR) optimal control. The model proposed in this article has been implemented on a computational model which is obtained from kinematic and dynamic relations of KHEPERA IV. The purpose of control is to track a predefined reference trajectory with the best po...
متن کاملInner FoV Stitching of Spaceborne TDI CCD Images Based on Sensor Geometry and Projection Plane in Object Space
High-quality inner FoV (Field of View) stitching is currently a prerequisite step for photogrammetric processing and application of image data acquired by spaceborne TDI CCD cameras. After reviewing the technical development in the issue, we present an inner FoV stitching method based on sensor geometry and projection plane in object space, in which the geometric sensor model of spaceborne TDI ...
متن کاملDelay Compensation on Fuzzy Trajectory Tracking Control of Omni-Directional Mobile Robots
This paper presents a delay compensator fuzzy control for trajectory tracking of omni-directional mobile robots. Fuzzy logic control (FLC) of the robots is a suitable strategy for dealing with model uncertainties, nonlinearities and disturbances. On the other hand, in many robotic applications such as mobile robots, delay phenomenon is able to substantially deteriorate the behavior of system's...
متن کاملDrilling Trajectory Prediction Model for Push-the-bit Rotary Steerable Bottom Hole Assembly
The study of rotary steering drilling technology is currently one of the hot topics in the drilling engineering field. It requires accurate well trajectory control instructions when rotary steerable tools are applied to achieve the well trajectory control goal. A drilling trajectory prediction model will benefit this progress. According to the continuous beam theory, a mechanical model of push-...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
دوره 2014 شماره
صفحات -
تاریخ انتشار 2014