Development of a State Feedback Controller for the Synchronous Buck Converter
نویسندگان
چکیده
A digital control algorithm for a current-mode (CM) and a voltage-mode (VM) synchronous buck converter (SBC) is developed. In both cases, the design leads to a stable controller, even for a duty cycle larger than 50%. The desired output voltage and the transient response can be independently specified. Moreover, zero steady-state error in the output voltage can be obtained with the aid of additional dynamics. In both cases, the specification is done by pole placement using complete state feedback. A discrete-time model is used to design the feedback gains. Both the stability and the small-signal transient response are analyzed. In another paper (Oliva et al., 2003) the control algorithms are experimentally validated with a DSP-controlled SBC. Keywords– Switch-mode power supplies, digital control, buck converter.
منابع مشابه
Direct Exact Feedback Linearization based control of the of the Output Voltage in the Minimum phase DC-DC Choppers
In this paper, a novel approach for control of the DC-DC buck converter in high-power and low-voltage applications is proposed. Designed method is developed according to state feedback linearization based controller , which is able to stabilize output voltage in a wide range of operation. It is clear that in high-power applications, parasitic elements of the converter may become comparable with...
متن کاملDigital Controller Designbased on Time Domain for DC-DC Buck Converter
In this paper, the digital controller design for compensating the dc-dc buck converter output voltage has been analyzed in the digital domain. The main idea of this paper is patterning the samples of high order ideal controller and using integral square error in determining digital PID coefficients. This approach provides higher precision of digital controller design and eliminates the need for...
متن کاملPassivity-Based Control of the DC-DC Buck Converters in High-Power Applications
In this paper, a novel approach for control of the DC-DC buck converter in high-power and low-voltage applications is proposed. Designed method is developed according to passivity based controller which is able to stabilize output voltage in a wide range of operation. It is clear that in high-power applications, parasitic elements of the converter may become comparable with load value and hence...
متن کاملA Fuzzy Controlled PWM Current Source Inverter for Wind Energy Conversion System
In recent years, there has been a fast growth in wind energy conversion system (WECS). There are two general types of wind turbines in WECS: fixed speed wind turbines and varying speed wind turbines.Permanent magnet synchronous generator (PMSG) is one of the most attractive generators for the varying speed turbine WECS.In this paper, a fuzzy controller is proposed to control the current source ...
متن کاملModeling, Control and Implementation of DC-DC Converters for Variable Frequency Operation pdfsubject
In this paper, novel small-signal averaged models for DC-DC converters operating at variable switching frequency are derived. This is achieved by separately considering the ontime and the off-time of the switching period. The derivation is shown in detail for a synchronous Buck converter and the model for a Boost converter is also presented. The model for the Buck converter is then used for the...
متن کامل