Functions for Estimating Stem Diameter and Tree Age Using Tree Height, Crown Width and Existing Stand Database Information

The aim was to investigate the relations between diameter at breast height and maximum crown diameter, tree height and other possible independent variables available in stand databases. Altogether 76 models for estimating stem diameter at breast height and 60 models for tree age were formulated using height and maximum crown diameter as independent variables. These types of models can be utilized in modern remote sensing applications where tree crown dimensions and tree height are measured automatically. Data from Finnish national forest inventory sample plots located throughout the country were used to develop the models, and a separate test site was used to evaluate them. The RMSEs of the diameter models for the entire country varied between 7.3% and 14.9% from the mean diameter depending on the combination of independent variables and species. The RMSEs of the age models for entire country ranged from 9.2% to 12.8% from the mean age. The regional models were formulated from a data set in which the country was divided into four geographical areas. These regional models reduced local error and gave better results than the general models. The standard deviation of the dbh estimate for the separate test site was almost 5 cm when maximum crown width alone was the independent variable. The deviation was smallest for birch. When tree height was the only independent variable, the standard deviation was about 3 cm, and when both height and maximum crown width were included it was under 3 cm. In the latter case, the deviation was equally small (11%) for birch and Norway spruce and greatest (13%) for Scots pine.