Graphene blisters with switchable shapes controlled by pressure and adhesion.
نویسندگان
چکیده
We created graphene blisters that cover and seal an annular cylinder-shaped microcavity in a SiO2 substrate filled with a gas. By controlling the pressure difference between the gas inside and outside of the microcavity, we switch the graphene membrane between multiple stable equilibrium configurations. We carried out experiments starting from the situation where the pressure of the gas inside and outside of the microcavity is set equal to a prescribed charging pressure, p0 and the graphene membrane covers the cavity like an annular drum, adhered to the central post and the surrounding substrate due to van der Waals forces. We decrease the outside pressure to a value, pe which causes it to bulge into an annular blister. We systematically increase the charging pressure by repeating this procedure causing the annular blister to continue to bulge until a critical charging pressure pc(i) is reached. At this point the graphene membrane delaminates from the post in an unstable manner, resulting in a switch of graphene membrane shape from an annular to a spherical blister. Continued increase of the charging pressure results in the spherical blister growing with its height increasing, but maintaining a constant radius until a second critical charging pressure pc(o) is reached at which point the blister begins to delaminate from the periphery of the cavity in a stable manner. Here, we report a series of experiments as well as a mechanics and thermodynamic model that demonstrate how the interplay among system parameters (geometry, graphene stiffness (number of layers), pressure, and adhesion energy) results in the ability to controllably switch graphene blisters among different shapes. Arrays of these blisters can be envisioned to create pressure-switchable surface properties where the difference between patterns of annular versus spherical blisters will impact functionalities such as wettability, friction, adhesion, and surface wave characteristics.
منابع مشابه
Mechanics of Adhered, Pressurized Graphene Blisters
We study the mechanics of pressurized graphene membranes using an experimental configuration that allows the determination of the elasticity of graphene and the adhesion energy between a substrate and a graphene (or other two-dimensional solid) membrane. The test consists of a monolayer graphene membrane adhered to a substrate by surface forces. The substrate is patterned with etched microcavit...
متن کاملAtomic intercalation to measure adhesion of graphene on graphite
The interest in mechanical properties of two-dimensional materials has emerged in light of new device concepts taking advantage of flexing, adhesion and friction. Here we demonstrate an effective method to measure adhesion of graphene atop highly ordered pyrolytic graphite, utilizing atomic-scale 'blisters' created in the top layer by neon atom intercalates. Detailed analysis of scanning tunnel...
متن کاملEffect of Graphene Oxide Decorated With Synthesized Nano-CeO2 on Barrier Properties of Epoxy Anticorrosion Coatings
In this paper, graphene oxide decorated with cerium oxide (CeO2) nanoparticles was prepared and used as anticorrosive pigments in epoxy nanocomposite coatings. The synthesized nanoparticle was characterized by FTIR, XRD, SEM, and EDX analyses. Graphene oxide decorated with CeO2 nanoparticles was dispersed in epoxy resin by sonication. The optimum nanoparticle content of th...
متن کاملSynthesis of Supported Pt Alloy three Dimensional Rhombus Shapes Nanoparticles for Oxygen Reduction Reaction
In this study PtFeCo ternary alloys nanoparticles of three dimentional (3D) rhombus shapes dispersed on graphene nanosheets (PtFeCo/Gr) were successfully prepared and studied as electrocatalysts for oxygen reduction reaction (ORR) in polymer-electrolyte fuel cells. A combination of analytical techniques including powder X-ray diffraction, X-ray photoelectron spectra, inductively coupled plasma-...
متن کاملTransforming Moiré blisters into geometric graphene nano-bubbles.
Strain engineering has been proposed as an alternative method for manipulating the electronic properties of graphene. However, the bottleneck for strain engineering in graphene has been the ability to control such strain patterns at the nanoscale. Here we show that high level of control can be accomplished by chemically modifying the adherence of graphene on metal. Using scanning tunnelling mic...
متن کاملذخیره در منابع من
با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید
برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید
ثبت ناماگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید
ورودعنوان ژورنال:
- Nano letters
دوره 13 12 شماره
صفحات -
تاریخ انتشار 2013