Three-dimensional printing of continuous-fiber composites by in-nozzle impregnation
نویسندگان
چکیده
We have developed a method for the three-dimensional (3D) printing of continuous fiber-reinforced thermoplastics based on fused-deposition modeling. The technique enables direct 3D fabrication without the use of molds and may become the standard next-generation composite fabrication methodology. A thermoplastic filament and continuous fibers were separately supplied to the 3D printer and the fibers were impregnated with the filament within the heated nozzle of the printer immediately before printing. Polylactic acid was used as the matrix while carbon fibers, or twisted yarns of natural jute fibers, were used as the reinforcements. The thermoplastics reinforced with unidirectional jute fibers were examples of plant-sourced composites; those reinforced with unidirectional carbon fiber showed mechanical properties superior to those of both the jute-reinforced and unreinforced thermoplastics. Continuous fiber reinforcement improved the tensile strength of the printed composites relative to the values shown by conventional 3D-printed polymer-based composites.
منابع مشابه
Rotational 3D printing of damage-tolerant composites with programmable mechanics
Natural composites exhibit exceptional mechanical performance that often arises from complex fiber arrangements within continuous matrices. Inspired by these natural systems, we developed a rotational 3D printing method that enables spatially controlled orientation of short fibers in polymer matrices solely by varying the nozzle rotation speed relative to the printing speed. Using this method, ...
متن کاملWater-based Engineering & Fabrication: Large-Scale Additive Manufacturing of Biomaterials
In nature, water assembles basic molecules into complex multi-functional structures with nano-to-macro property variation. Such processes generally consume low amounts of energy, produce little to no waste, and take advantage of ambient conditions. In contrast digital manufacturing platforms are generally characterized as uni-functional, wasteful, fuel-based and often toxic. In this paper we ex...
متن کامل3D-printing of lightweight cellular composites.
A new epoxy-based ink is reported, which enables 3D printing of lightweight cellular composites with controlled alignment of multiscale, high-aspectratio fiber reinforcement to create hierarchical structures inspired by balsa wood. Young's modulus values up to 10 times higher than existing commercially available 3D-printed polymers are attainable, while comparable strength values are maintained.
متن کاملFreeform 3D Printing: Towards a Sustainable Approach to Additive Manufacturing
Most additive manufacturing technologies, such as 3D printing, utilize support materials in the fabrication process. Beyond the technical challenges of support removal, these materials are wasteful – increasing fabrication and processing time while impacting quality. This paper presents “Freeform Printing”, a novel design approach for 3D printing without additional auxiliary structures. A 6-axi...
متن کاملInvestigation of Mechanical Properties of Lithium-Based Geopolymer Composites Reinforced with Basalt Fibers
Recently, geopolymer binders have been considered because of low cost, simple processes for synthesis and many raw materials in nature. Geopolymer with brittle nature does not have high strength and cannot be used alone for structural materials. Therefore, to use in different structures, the composite which is reinforced with fibers such as carbon, glass, basalt, etchasbeen used. In this resear...
متن کامل