The Effect of Different Storage Media on Color Stability of Self-Adhesive Composite Resin Cements for up to One Year

نویسندگان

  • Anja Liebermann
  • Malgorzata Roos
  • Bogna Stawarczyk
چکیده

The aim of this study was to analyze the long-term color stability of eight self-adhesive composite resin cements (SACRCs) after storage in diverse media for up to one year. 480 discs (diameter: 12 mm/thickness: 1.0 ± 0.05 mm) were fabricated (n = 60/SACRC): (1) BeautyCem (BEA); (2) Bifix SE (BIF); (3) Clearfil SA Cement Automix (CLE); (4) RelyX Unicem 2 Automix (RXU); (5) SeT (SET); (6) SmartCem 2 (SMC); (7) SoloCem (SOC); and (8) SpeedCEM (SPC). After polishing, specimens were immersed in (a) red wine (RW); (b) curry-solution (CU); (c) cress-solution (CR); and (d) distilled water (DW) at 37 °C and measured after 7, 28, 90, 180, and 365 days for color differences (ΔE) and water absorption (WA). Non-aged specimens were used as baselines. After 365 days, all of the discs were polished and their ΔE was measured. Data were analyzed using Kolmogorov-Smirnov, partial-eta-squared/ηP², 3-/1-way ANOVA with Tukey-HSD post-hoc test (α = 0.05). Significant differences occurred between all SACRCs for WA (p ≤ 0.003), except in RXU and in SET and in ΔE (p ≤ 0.002), except in SET and SPC. The significantly highest WA presented in SOC; the lowest showed in BEA. Significant ΔE differences and a decrease after polishing between all storage media were found (p < 0.001) with highest values for RW, followed by CU, CR, and DW. The lowest ΔE was measured for CLE, followed by SOC, BIF, RXU, BEA, SPC, SET, and SMC (p < 0.001) and increased significantly during aging. The highest ΔE decrease presented in BEA. SACRCs showed an increase in WA/ΔE within total aging time. Discoloration could not be removed completely by polishing. SACRCs need to be carefully selected for restorations in the esthetical zone with visible restoration margins. Polishing can significantly reduce the marginal discoloration.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Factors contributing to the incompatibility between new adhesive systems and various composite resin restorations

  Factors contributing to the incompatibility between new adhesive systems and various composite resin restorations     Dr. F. Maleknejad* - Dr. H. Moosavi**  *- Associate Professor of Operative Dentistry Dept. - Faculty of Dentistry – Mashhad University of Medical Sciences.  **- Assistant Professor of Operative Dentistry Dept. - Faculty of Dentistry – Mashhad University of Medical Sciences.   ...

متن کامل

Evaluation of the Effect of Sodium Hypochlorite Irrigant on Pull-out Bond Strength of FRC Posts Using Different Resin Cements

Introduction: To evaluate the effects of using sodium hypochlorite irrigant on pull-out bond strength of self-etch and self-adhesive resin cements to dentin. Methods: Sixty intact premolars were decoronated and the root canals were prepared by step-back technique. The teeth were divided into two groups according to the irrigant used during root canal treatment: 5.25% sodium hypochlorite and nor...

متن کامل

بررسی آزمایشگاهی استحکام باند طولانی مدت دو نوع سمان رزینی به مینا و عاج دندان

  Background and Aims : In this in vitro study, the long-term bond strength of a self-adhesive resin cement and conventional resin cements to human enamel and dentin was compared .   Materials and Methods: 80 sections of intact human third molars were randomly assigned into eight groups according to the cement type [Rely X Unicem (RXU), Rely X ARC (RXA)], bond substrate (enamel, dentin) and the...

متن کامل

Effect of Accelerated Aging on the Color Stability of Dual-Cured Self-Adhesive Resin Cements

Purpose: The effect of accelerated aging on color stability of various dual-cured self-adhesive resin cements were evaluated in this study. Materials and Methods: Color stability was examined using three different brands of dual-cured self-adhesive resin cements: G-CEM LinkAce (GC America), MaxCem Elite (Kerr), and PermaCem 2.0 (DMG) with the equivalent color shade. Each resin cement was filled...

متن کامل

Effect of Aging on the color stability of bleached shade resin composite (invitro)

Background and Aim: One of the most noticeable problems of composite restorations is color change of them over the time Due to this the most important advantage of composites which is providing esthetic is gone, so restorations need to be changed.The purpose of this   study is to evaluate the effect of aging on color stability of two types of  Bleached shade composites. Materials and methods: I...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره 10  شماره 

صفحات  -

تاریخ انتشار 2017