Interfacial Reactions Between Sn–58 mass%Bi Eutectic Solder and (Cu, Electroless Ni–P/Cu) Substrate

نویسندگان

  • Jeong-Won Yoon
  • Chang-Bae Lee
  • Seung-Boo Jung
چکیده

The growth kinetics of intermetallic compound layers formed between eutectic Sn–58Bi solder and (Cu, electroless Ni–P/Cu) substrate were investigated at temperature between 70 and 120◦C for 1 to 60 days. The layer growth of intermetallic compound in the couple of the Sn–58Bi/Cu and Sn–58Bi/electroless Ni–P system satisfied the parabolic law at given temperature range. As a whole, because the values of time exponent (n) have approximately 0.5, the layer growth of the intermetallic compound was mainly controlled by diffusion mechanism over the temperature range studied. The apparent activation energies of Cu6Sn5 and Ni3Sn4 intermetallic compound in the couple of the Sn–58Bi/Cu and Sn–58Bi/electroless Ni–P were 127.9 and 81.6 kJ/mol, respectively.

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

منابع مشابه

Interfacial Reaction and Mechanical Characterization of Eutectic Sn--Zn/ENIG Solder Joints during Reflow and Aging

The interfacial reactions and joint reliabilities between Sn–9mass%Zn solder and an electroless nickel-immersion gold (ENIG) plated Cu substrate were investigated during reflow and isothermal aging at temperatures between 343 and 423K for aging times of up to 2400 h. After reflowing and aging, the intermetallic compound (IMC) formed at the interface was found to be AuZn3. No Ni-containing react...

متن کامل

Study of Reactive Wetting of Sn–0.7Cu and Sn–0.3Ag–0.7Cu Lead Free Solders during Solidification on Nickel Coated Al Substrates

Microstructure, wetting behavior and interfacial reactions between Sn–0.7Cu and Sn–0.3Ag–0.7Cu (SAC0307) solders solidified on Ni coated Al substrates were compared and investigated. Microstructure of Sn–0.7Cu alloy exhibited a eutectic matrix composed of primary β-Sn dendrites with a fine dispersion of Cu6Sn5 intermetallics whereas microstructure of SAC0307 alloy exhibited coarser Cu6Sn5 and f...

متن کامل

Interfacial Reaction and Mechanical Properties of Sn-Bi Solder joints

Sn-Bi solder with different Bi content can realize a low-to-medium-to-high soldering process. To obtain the effect of Bi content in Sn-Bi solder on the microstructure of solder, interfacial behaviors in solder joints with Cu and the joints strength, five Sn-Bi solders including Sn-5Bi and Sn-15Bi solid solution, Sn-30Bi and Sn-45Bi hypoeutectic and Sn-58Bi eutectic were selected in this work. T...

متن کامل

Effect of Surface Finish of Substrate on Mechanical Reliability of in-48SN Solder Joints in Moems Package

Interfacial reactions and shear properties of the In-48Sn (in wt.%) ball grid array (BGA) solder joints after bonding were investigated with four different surface finishes of the substrate over an underlying Cu pad: electroplated Ni/Au (hereafter E-NG), electroless Ni/immersion Au (hereafter ENIG), immersion Ag (hereafter I-Ag) and organic solderability preservative (hereafter OSP). During bon...

متن کامل

Effect of Ni or Co Addition to Sn-Ag Solder on Microstructure and Joint Strength at Interface

Among various lead-free alloys, Sn-Ag(-Cu) system solders are considered the most promising lead-free solders for both wave and reflow soldering technology. Moreover, to improve the characteristics of lead-free solders, the effect of the addition of minor elements to lead-free solders on the properties of solder and interfacial reactions have been studied. The purpose of this research was to in...

متن کامل

ذخیره در منابع من


  با ذخیره ی این منبع در منابع من، دسترسی به آن را برای استفاده های بعدی آسان تر کنید

برای دانلود متن کامل این مقاله و بیش از 32 میلیون مقاله دیگر ابتدا ثبت نام کنید

ثبت نام

اگر عضو سایت هستید لطفا وارد حساب کاربری خود شوید

عنوان ژورنال:

دوره   شماره 

صفحات  -

تاریخ انتشار 2002